Kyocera KM-2030 Instruction Handbook Manual page 80

Section 3 Troubleshooting
Problem
I am not able to perform Encrypted
Communication.
I am not able to perform Remote
Switching.
I was able to receive a fax, but it
was not printed out and the
documents are not in memory.
I am not able to receive
documents.
I am not able to perform Memory
Reception.
I am not able to perform Polling
Reception.
3-6
Check point
Did the transmitting party perform the
appropriate registration procedure for the
abbreviated number or one-touch key
(designated for Encrypted Transmission)
as decided in advance with the receiving
party?
Did the receiving party perform the
appropriate registration procedure for the
appropriate Encryption Box as decided
in advance with the transmitting party?
Is the Encryption Key you used correct?
Is your telephone service set for pulse
dialing?
Did you use the correct Remote
Switching number?
Is Fax Forwarding turned ON?
Is the modular cord connected correctly?
Is "Communication Error." displayed?
Is Password Check Reception turned
ON?
Is the memory in your fax machine full?
Did the transmitting party perform the
Polling Transmission procedure
correctly?
Procedure
Check the information to be registered
once again with the other party.
Check the information to be registered
once again with the other party.
Check the Encryption Key to be
registered once again with the other
party.
Some telephones allow you to transmit
the desired tone signals. Refer to the
Instruction Manual for the telephone
being used.
Check the registered number.
(Factory default setting: 55)
Check the Fax Forwarding setting.
Connect the modular cord correctly.
Perform the necessary procedure to
correct the error and try to receive the
documents again.
Turn Password Check Reception OFF.
Try to receive the documents once again
after memory becomes available or after
you create available space in memory.
Check with the transmitting party.
Page
1-34
1-40
4-43
4-41
___
4-5
4-23
1-2
___
4-40
2-18
4-13
___