Fcc Part 68 Requirements - Kyocera KM-2030 Instruction Handbook Manual

Fax system (b)
Hide thumbs Also See for KM-2030:
Table of Contents

Advertisement

FCC PART 68 REQUIREMENTS

1. This equipment complies with Part 68 of the FCC rules.
On the rear side of this equipment is a label that contains,
among other information, the FCC registration number
and ringer equivalence number (REN) for this equipment.
If requested, this information must be provided to the
telephone company.
2. This equipment connects to the network via USOC RJ11C.
3. An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is designed
to be connected to the telephone network of premised
wiring using a compatible modular jack which is Part 68
compliant. See Installation Instructions for details.
4. The REN is used to determine the quantity of devices
which may be connected to the telephone line.
Excessive REN's on the telephone line may result in the
devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the REN's should not
exceed five (5.0). To be certain of the number of devices
that may be connected to the line, as determined by the
total REN's, contact the telephone company to
determine the maximum REN for the calling area.
5. If the terminal equipment causes harm to the telephone
network, the telephone company will notify you in
advance. But if advance notice isn't practical, the
telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
6. The telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide advance
notice in order for you to make the necessary
modifications in order to maintain uninterrupted service.
7. If trouble is experienced with this equipment, please
contact the following company for repair and (or)
warranty information:
KYOCERA MITA AMERICA, INC.
225 Sand Road, P.O.Box 40008
Fairfield, New Jersey 07004-0008 U.S.A.
(973) 808-8444
If the trouble is causing harm to the telephone network,
the telephone company may request you remove the
equipment from the network until the problem is resolved.
8. This equipment cannot be used on public coin service
provided by the telephone company. Connection to Party
Line Service is subject to state tariffs. (Contact the state
public utility commission, public service commission or
corporation commission for information.)
9. The telephone consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other
electronic device to send any message via a telephone
fax machine unless such message clearly contains, in a
margin at the top or bottom of each transmitted page or
on the first page of the transmission, the date and time it
is sent and an identification of the business or other entity,
or other individual sending the message and the
telephone number of the sending machine or such
business, other entity, or individual.
(In order to program this information into your fax machine
and insure that it will be transmitted, refer to Self-station
registration, page 1-10, Setting the date and time,
page 1-8, and Transmit Terminal Identifier, page 1-7.)
10. This equipment is Hearing-Aid Compatible.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents