1. Manuals
  2. Brands
  3. Kyocera Manuals
  4. All in One Printer
  5. KM-1530
  6. Instruction handbook manual

Kyocera KM-1530 Instruction Handbook Manual

Printing system (k) functions edition
Hide thumbs Also See for KM-1530:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction Handbook Manual
INSTRUCTION HANDBOOK
Introduction
Chapter 1 Printer-related operation
1. Printer Settings (15 ppm copier)
2. Printer Settings (20 ppm copier)
3. Memory Card / RAM Disk
Chapter 2 Software-related operation
1. Procedure for Installing and Printing
with a Printer Driver
2. Windows XL Driver
3. Printer Driver for Windows 95/98
4. Printer Driver for Windows NT
5. Printer Driver for Windows 2000
6. Printer Driver for Macintosh
<Functions Edition> Revision 1

Advertisement

Table of Contents
loading

Related Manuals for Kyocera KM-1530

Summary of Contents for Kyocera KM-1530

  • Page 1 INSTRUCTION HANDBOOK <Functions Edition> Revision 1 Introduction Chapter 1 Printer-related operation 1. Printer Settings (15 ppm copier) 2. Printer Settings (20 ppm copier) 3. Memory Card / RAM Disk Chapter 2 Software-related operation 1. Procedure for Installing and Printing with a Printer Driver 2.

  • Page 2: Trademark Information

    Trademark Information • PRESCRIBE is a registered trademark of Kyocera Corporation. • PRESCRIBE 2e and KPDL2 are trademarks of Kyocera Corporation. • MS-DOS, Windows and Windows NT are trademarks of Microsoft Corporation. • PCL and PJL are registered trademarks of Hewlett-Packard Company.
  • Page 3 IBM PROGRAM LICENSE AGREEMENT THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS (“PROGRAMS”) WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION (“IBM”). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND.
  • Page 4 Typeface Trademark Acknowledgement All resident fonts in this printer are licensed from Agfa Corporation. Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation.
  • Page 5 1. Printer Settings (15 ppm copier) 1. Printer Settings (15 ppm copier) IMPORTANT! All setting items and the selection of their actual settings are accomplished in this machine based on a maximum 3-digit entry system. Refer to “1-2 List of settings” on page 1-3 for information regarding the various items as well as their corresponding menu numbers and available settings.
  • Page 6 1. Printer Settings (15 ppm copier) Operation keys <15 ppm copier - Inch version> Printer Key Copy quality/magnification display Enter (Manual) key Numeric keys [Zoom (-)] key [Zoom (+)] key Stop/Clear Start (GO) key (CANCEL) key <15 ppm copier - Metric version> Printer Key Copy quality/magnification display Enter (Manual) key...

  • Page 7: Network Card Status Page Print Out On/Off

    1. Printer Settings (15 ppm copier) 1-2 List of settings Menu Item Available settings Remarks number Printer Status Page print out – – – Print out will begin as soon as the Prints out a list of such items as the current printer corresponding menu number is default settings and memory volume, etc.
  • Page 8 1. Printer Settings (15 ppm copier) Menu Item Available settings Remarks number KPDL Error Report print out ON/OFF (1) On Sets whether an Error Report will be automatically (2) Off printed out whenever a KPDL error occurs. Auto emulation switching (parallel interface) (1) Line Printer Sets the back-up emulation that, depending upon (2) IBM Proprinter...
  • Page 9 1. Printer Settings (15 ppm copier) Menu Item Available settings Remarks number Wide A4 ON/OFF (1) On Increases the printing area on A4 size paper. (2) Off Printing orientation (parallel interface) (1) Portrait (2) Landscape Printing orientation (network interface) (1) Portrait Available only when the Network (2) Landscape Card is installed.
  • Page 10 1. Printer Settings (15 ppm copier) Menu Item Available settings Remarks number Receive dump mode (1) OK The data that the printer receives for debugging programs and files is turned into hexadecimal code and printed out. If “OK” (setting: 1) is selected here, this receive dump mode will be activated.
  • Page 11 2. Printer Settings (20 ppm copier) 2. Printer Settings (20 ppm copier) 2-1 Procedure for making settings Press the Printer key. The machine will switch to the printer mode. Use the “ ” and “ ” cursor keys to select “MENU” and then press the Enter key. Select the desired setting.
  • Page 12 2. Printer Settings (20 ppm copier) Operation keys <20 ppm copier - Inch version> Printer Key Message display Numeric keys < > (Cursor left) (Cursor right) (Cursor) key (Cursor) key Stop/Clear key “GO” command “CANCEL” command “MENU” command <20 ppm copier - Metric version> Printer Key Message display Numeric keys...
  • Page 13 2. Printer Settings (20 ppm copier) 2-2 Menu flow chart MENU Printer Status Page print out Interface selection Parallel setting Parallel TX/RX mode Network Card (option) settings NetWare ON/OFF NetWare frame type TCP/IP ON/OFF DHCP ON/OFF IP address Subnet Mask Gateway address EtherTalk ON/OFF Network Card Status Page print out ON/OFF...
  • Page 14 2. Printer Settings (20 ppm copier) Font settings Internal Font selection Courier font Letter Gothic font Font List print out Option Font selection Font List print out Printing environment settings Number of copies Printing orientation Page Protect Line Feed (LF) handling Carriage Return (CR) handling Wide A4 ON/OFF Printing resolution settings...
  • Page 15 2. Printer Settings (20 ppm copier) RAM disk ON/OFF RAM disk size Reading data Reading program data Writing data Deleting data Deleting font data Deleting program data Deleting macro data Partition List print out Memory Card settings Reading fonts Reading macro data Reading data Reading program data Writing data...
  • Page 16 2. Printer Settings (20 ppm copier) Paper handling settings Duplex mode A4 & Letter usage ON/OFF Bypass mode Other settings Form feed time-out Receive dump mode Printer reset Resource protect mode Auto Continue ON/OFF Recovery time for Auto Continue Service Service Rep Status Page print out...
  • Page 17 2. Printer Settings (20 ppm copier) 2-3 List of settings Item No. Item Display message Available settings Remarks Printer Status Page print out Print Status Page No, Print Prints out a list of such items as printer default settings and memory volume, etc. Interface selection Interface Parallel, Option...

  • Page 18: Code Set

    2. Printer Settings (20 ppm copier) Item No. Item Display message Available settings Remarks Code Set Code Set The code sets Selects the code set that will be used under available for each emulation protocol. (There is no selection will differ selection for the code set under “KPDL”...
  • Page 19 2. Printer Settings (20 ppm copier) Item No. Item Display message Available settings Remarks Page Protect Page Protect Auto, On If “AUTO” is selected here, the machine will monitor the data and, if necessary, will automatically turn Page Protect ON. If a “Print overrun”...

  • Page 20: Reading Macro Data

    2. Printer Settings (20 ppm copier) Item No. Item Display message Available settings Remarks Deleting data Delete Data Select the name of Displayed only when there is Deletes the selected data from the RAM the partition which appropriate data in the RAM disk. disk.
  • Page 21 2. Printer Settings (20 ppm copier) Item No. Item Display message Available settings Remarks Deleting font data Delete Font Select the name of Displayed only when there is Deletes the selected font data from the the font from among appropriate font data in the Memory Card.
  • Page 22 2. Printer Settings (20 ppm copier) Item No. Item Display message Available settings Remarks Receive dump mode Print HEX-DUMP The data that the printer receives for debugging programs and files is turned into hexadecimal code and printed out. If “OK” is selected here, this receive dump mode will be activated.
  • Page 23 3. Memory Card / RAM Disk 3. Memory Card / RAM Disk 3-1 Memory Card This machine comes equipped with a slot for inserting a Memory Card. Use a Memory Card that contains fonts in order to print with fonts other than those already installed in the machine, or use the card to save and then read print data.
  • Page 24 3.Memory Card / RAM Disk 3-3 Printer control commands It is possible to issue simple commands to the Memory Card and RAM Disk from the MS-DOS Prompt in Windows. 3-3-1 Using printer control commands A printer control command line includes “!R!” (Command operation start), as well the actual commands and parameters that are to be implemented and that are entered after that.
  • Page 25 3. Memory Card / RAM Disk 3-3-2 Formatting the Memory Card Perform the following procedure when you want to initialize the Memory Card from your computer. * In 20 ppm copiers, the Memory Card is initialized from the operation panel on the copier itself. Refer to “2. Printer Settings (20 ppm copier)” on page 2-1 for information on the appropriate procedure.
  • Page 26 3.Memory Card / RAM Disk 3-3-4 Writing font data Perform the following procedure when you want to write font data to a Memory Card or RAM Disk from your computer. At the same time as the font data is written to disk, it will be sent to the printer as well. * Verify beforehand that the Memory Card is in a write-enabled state and that the RAM Disk is turned ON.
  • Page 27 3. Memory Card / RAM Disk 3-3-5 Reading print data Perform the following procedure when you want to read print data that has been saved on a Memory Card or RAM Disk. * In 20 ppm copiers, reading print data is accomplished from the operation panel on the copier itself. Refer to “2. Printer Settings (20 ppm copier)”...
  • Page 28 3.Memory Card / RAM Disk 3-3-7 Printing out the Partition List Perform the following procedure when you want to print out the Partition List in order to verify the print data and font data that has been saved on a Memory Card or RAM Disk. * In 20 ppm copiers, Partition List print out is accomplished from the operation panel on the copier itself.
  • Page 29 1. Procedure for Installing and Printing with a Printer Driver 1. Procedure for Installing and Printing with a Printer Driver 1-1 Included printer drivers The following printer drivers are included with this product. * Each type of printer driver has a version appropriate to a specific model of copy machine. Be sure to choose the driver that is appropriate for your copier.
  • Page 30 1. Procedure for Installing and Printing with a Printer Driver 1-2 System Conditions Windows 95 IBM PC / AT or compatible i486SX 25 MHz or more System 8 MB or more requirements 10 MB or more Pentium 90 MHz or more Recomended 16 MB or more requirements...
  • Page 31 1. Procedure for Installing and Printing with a Printer Driver 1-3 Screen that Appears when the CD-ROM is Inserted This section explains the screen that appears when the CD-ROM supplied with the Printing System (K) is inserted into the CD-ROM drive. Install Drivers Click to start installation of the printer driver.
  • Page 32 1. Procedure for Installing and Printing with a Printer Driver 1-4 Installing the Printer Driver (Windows) Install the printer driver as follows: * The printer can be connected to the computer by one of the following two methods: local or network. If you want to connect them through network, refer to the operation manual of the operating system (OS).
  • Page 33 1. Procedure for Installing and Printing with a Printer Driver Select the driver type. From the list, select the type of driver to be installed, then click Next. * Refer to “1-1 Included printer Drivers” on page 1-1 for information regarding each printer driver.
  • Page 34 1. Procedure for Installing and Printing with a Printer Driver Select a printer port. From the list, select the desired port, then click Next. * Normally, set to LPT1. * When installing the printer driver for Windows NT, the Add LPR Port button will appear below the box, so press the button to set the desired LPR printer.
  • Page 35 1. Procedure for Installing and Printing with a Printer Driver 1-5 Uninstalling the Printer Driver The following procedure explains how to uninstall the printer drivers. The uninstall program can be found on the CD-ROM that is included with this product. Start Windows.
  • Page 36 1. Procedure for Installing and Printing with a Printer Driver 1-6 Printing The following is an example procedure for printing using a printer driver under the conditions and environment noted below. • OS : Windows 95 • Printer driver : KPDL2 Driver •...
  • Page 37 1. Procedure for Installing and Printing with a Printer Driver Printing from the application Use the application that you want to use to open the document that you want to print. Select [Print] in the [File] menu. The [Print] dialogue box will appear. Select the desired number of copies that you want to make and which pages are to be printed.
  • Page 38 2. Windows XL Driver 2. Windows XL Driver The following section explains the functions of the XL driver. * This Instruction Handbook uses illustrations from the message display of the 20 ppm copier for purposes of explanation, but the actual basic operation procedure is the same for 15 ppm copiers as well.
  • Page 39 2. Windows XL Driver 2-2 Media Tab Paper Size: Allows you to select a standard size of paper or an envelope size. The following sizes of paper or envelope can be used with this printer. Standard-size paper Letter (8-1/2" x 11"), Legal (8-1/2" x 14"), Ledger (11" x 17"), sheet Statement (5-1/2"...
  • Page 40 2. Windows XL Driver 2-2-1 Custom Media Size dialog box Setting a custom paper size Perform the following procedure in order to register a custom size when you want to print onto a non-standard size of paper. The information registered here will be displayed under the “Page Size” setting in the Media Tab as well as in the Paper Size setting of your application.
  • Page 41 2. Windows XL Driver 2-3 Layout Tab Pages per Sheet: Allows you to print reduced images of multiple (1, 2, 4, 6, 9, 16 or 25) pages onto a single sheet of paper. This function is called “N-Up” printing (where “N” equals the number of image pages). Reduction of the images is calculated automatically so that all of the selected pages fit onto the single sheet of paper.
  • Page 42 2. Windows XL Driver 2-4 Imaging Tab Print Quality: Specifies the printing resolution (number of dots per inch) to be used when printing. Select between “600 dpi [High]”, “300 dpi [Low]” and “Draft Mode”. If you select the “Draft Mode” option, printing will be accomplished printing in a toner-saving mode.
  • Page 43 2. Windows XL Driver 2-5 Output Tab Output to: Specifies the location of ejection of printed copies. Selection is possible when the optional Job Separator and or Finisher are installed. [Inner Tray] ......... Copies will be ejected onto the Inner tray. [Separator Tray] ......
  • Page 44 2. Windows XL Driver 2-6 Device Settings Tab To access the Device Settings screen, in step 4 on page 2-1 select [Properties] from the menu and then click on the Device Settings Tab. When you have added optional equipment, make the appropriate settings for that equipment here. Once the corresponding setting is com- plete, the corresponding function of the installed option will be added to the printer.
  • Page 45 2. Windows XL Driver 2-6-1 User Settings General Register the desired user and/or department name. Page Description Language The emulation modes that can be used with this product will be displayed in the dropdown list. If multiple modes are displayed, it is possible to select the desired mode.
  • Page 46 3. Printer Driver for Windows 95/98 3. Printer Driver for Windows 95/98 The following procedure explains the functions of the Universal driver and the KPDL2 driver for those who use Windows 95 or Windows 98 as their operating system. * This Instruction Handbook uses illustrations from the message display of the 20 ppm copier for purposes of explanation, but the actual basic operation procedure is the same for 15 ppm copiers as well.
  • Page 47 3. Printer Driver for Windows 95/98 3-2 Paper Tab (Universal Driver) Paper size: Select the size of standard-size paper sheet or envelope. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2" sheet x 8 1/2"), A3, A4, A5, A6, Folio (210 x 330 mm), JIS B4, JIS B5, JIS B6 Envelope...
  • Page 48 3. Printer Driver for Windows 95/98 3-2-1 Paper -- More Options (Universal Driver) Printing on both sides (duplex printing) Allows you to set the desired duplex mode. The factory default setting is “None”. [None] ......... Does not print on both sides. [Flip on long edge] ....
  • Page 49 3. Printer Driver for Windows 95/98 3-3 Graphics Tab (Universal Driver) Resolution: Specify the desired print resolution. The resolution must be specified in the number of dots per inch (dpi). Select between “600 x 600 dots per inch” and “300 x 300 dots per inch”. The factory default setting is “600 dots per inch”. Dithering Specifies the method of Dithering.
  • Page 50 3. Printer Driver for Windows 95/98 3-4 Device Option Tab (Universal Driver) Print quality:(Management Code) This setting is used when Copy Management is turned ON in the printer. If the Management code that you selected from the dropdown list here and that selected in the printer itself do not match, printing will not be possible.
  • Page 51 3. Printer Driver for Windows 95/98 3-5 Paper Tab (KPDL2 Driver) Paper Size: Select the size of standard-size paper sheet or envelope. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2" sheet x 8 1/2"), A3, A4, A5, A6, Folio (210 x 330 mm), JIS B4, JIS B5, JIS B6 Envelope...
  • Page 52 3. Printer Driver for Windows 95/98 3-5-1 More Paper Options (KPDL2 Driver) <Only available in the 20 ppm copiers> Printing on both sides (duplex printing) Allows you to set the desired duplex mode. The factory default setting is “None”. [None] ......... Does not print on both sides. [Flip on long edge] ....
  • Page 53 3. Printer Driver for Windows 95/98 3-6 Graphics Tab (KPDL2 Driver) Resolution: Specify the desired print resolution. The resolution must be specified in the number of dots per inch (dpi). Select between “600 x 600 dots per inch (dpi)” and “300 x 300 dots per inch (dpi)”. The factory default setting is “600 dots per inch (dpi)”. Halftoning: Specifies values for the number of line per inch “frequency”...
  • Page 54 3. Printer Driver for Windows 95/98 3-7 Device Options Tab (KPDL2 Driver) Available printer memory (in KB) Indicates the amount of memory available for printing. As this is determined according to the amount of memory entered as the “VM Option” setting under “Installable Options”, there is normally no need to change it. Print features It is possible to change the settings related to various printer functions.
  • Page 55 3. Printer Driver for Windows 95/98 Staple It is possible to staple your copy sets if the optional Finisher is installed. * Stapling is only available with 20 ppm copiers. * The following settings are required before stapling is possible: (1) “Installable Options”...
  • Page 56 3. Printer Driver for Windows 95/98 3-8 PostScript Tab (KPDL2 Driver) Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information. 3-11...
  • Page 57 4. Printer Driver for WindowsNT 4. Printer Driver for WindowsNT The following procedure explains the functions of the Universal driver and the KPDL2 driver for those who use Windows NT4.0 as their operating system. * This Instruction Handbook uses illustrations from the message display of the 20 ppm copier for purposes of explanation, but the actual basic operation procedure is the same for 15 ppm copiers as well.
  • Page 58 4. Printer Driver for WindowsNT 4-2 Paper/Output (Universal Driver) Paper Size: Select the size of standard-size paper sheet or envelope. Selection can be made in the “Change ‘Paper Size’ Setting” area. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper Letter (8 1/2"...
  • Page 59 4. Printer Driver for WindowsNT Print on Both Side (Duplex Printing): Allows you to set the desired duplex mode. Setting can be made in the “Change ‘Print on Both Sides “Duplex Printing”’ Setting area. The factory default setting is “None”. [None] .........
  • Page 60 4. Printer Driver for WindowsNT 4-4 Document Options (Universal Driver) Media: Saves on toner. Setting can be made in the “Change ‘Media’ Setting” area. The factory default setting is “Off”. Paper/Output: Allows you to select the location of ejection and whether you want to staple the sets or not when the optional Job Separator or Finisher is installed.
  • Page 61 4. Printer Driver for WindowsNT 4-5 Device Settings Tab (Universal Driver) In order to view this window and make settings for optional equipment, select “Properties” in step 4 on page 4-1 and then click on the “Device Settings” Tab. Installed Memory (Kilobyte) Perform this setting according to the amount of memory in your printer.
  • Page 62 4. Printer Driver for WindowsNT 4-6 Paper/Output (KPDL2 Driver) Paper Size: Select the size of standard-size paper sheet or envelope. Selection can be made in the “Change ‘Paper Size’ Setting” area. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper Letter (8 1/2"...
  • Page 63 4. Printer Driver for WindowsNT Copy Count: Set the number of copies to be made. The allowable range is from 1 to 999. Setting can be made in the “Change ‘Copy Count’ Setting” area. Click the arrow buttons ( , ) or enter directly from the keyboard. The factory default setting is “1”. Print on Both side (Duplex Printing): Allows you to set the desired duplex mode.
  • Page 64 4. Printer Driver for WindowsNT 4-8 Document Options (KPDL2 Driver) 4-8-1 PostScript Options: Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information.
  • Page 65 4. Printer Driver for WindowsNT 4-8-2 Printer Features EcoPrint: Saves on toner. Setting can be made in the “Change ‘EcoPrint’ Setting” area. The factory default setting is “Off”. Paper Destination: Allows you to select the location of ejection when the optional Job Separator or Finisher is installed. Select the desired function here and then change the setting in the field under “Change 'Paper Destination' Setting”.
  • Page 66 4. Printer Driver for WindowsNT Staple It is possible to staple your copy sets if the optional Finisher is installed. Select the desired function here and then change the setting in the field under “Change 'Paper Destination' Setting”. * Stapling is only available with 20 ppm copiers. * The following settings are required before stapling is possible: (1) “Installable Options”...
  • Page 67 4. Printer Driver for WindowsNT 4-9 Device Settings Tab (KPDL2 Driver) 4-9-1 Installable Options In order to view this window and make settings for optional equipment, select “Properties” in step 4 on page 4-1 and then click on the “Device Settings”...

  • Page 68: Printer Driver For Windows

    5. Printer Driver for Windows2000 5. Printer Driver for Windows2000 The following procedure explains the functions of the Universal driver and the KPDL2 driver for those who use Windows 2000 as their operating system. * This Instruction Handbook uses illustrations from the message display of the 20 ppm copier for purposes of explanation, but the actual basic operation procedure is the same for 15 ppm copiers as well.
  • Page 69 5. Printer Driver for Windows2000 5-2 Layout Tab Orientation Select the print orientation from the following: [Portrait] ........Prints lengthwise. [Landscape] ....... Prints widthwise. [Rotated Landscape] ....Selecting this option prints upside down. (only available with KPDL2 Driver) Print on Both Sides (Duplex) <Only available in the 20 ppm copiers>...
  • Page 70 5. Printer Driver for Windows2000 5-3 Paper/Quality Tab : (Tray Selection) <Universal Driver> <KPDL2 Driver> <Universal Driver> Paper Source: You can select the source of paper feed according to the desired tray. Selection is possible from among the following items. If you select “Auto Source Selection”, the printer will automatically choose the tray that contains the most appropriate paper for the job.
  • Page 71 5. Printer Driver for Windows2000 5-4 Advanced Options The following explains the Advanced Options dialog box. * The explanations here are focused mostly on the special features of this product. Refer to On-Line Help for information regarding items that are not explained in this Instruction Handbook.
  • Page 72 5. Printer Driver for Windows2000 5-4-3 Document Options Advanced Printing Features: Be sure to select “Enable” for this setting if you want to use the “Pages Per Sheet” (N-Up) function or the “Back to Front” option under the “Page Order” setting.
  • Page 73 5. Printer Driver for Windows2000 5-4-4 Printer Features Eco print: Saves on toner. The factory default setting is “Off”. Paper Destination: Allows you to select the location of ejection when the optional Job Separator or Finisher is installed. [Inner Tray] ......... Copies will be ejected onto the Inner tray. [Job Separator] ......
  • Page 74 5. Printer Driver for Windows2000 Staple: It is possible to staple your copy sets if the optional Finisher is installed. * Stapling is only available with 20 ppm copiers. * The following settings are required before stapling is possible: (1) “Installable Options” setting in the “Device settings” Tab under “Properties” (Refer to step 4 on page 5-1 for information on accessing “Properties”.) Select “Finisher”...
  • Page 75 5. Printer Driver for Windows2000 5-4-5 PostScript Options: This option can only be used with a KPDL2 Driver. Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information.
  • Page 76 5. Printer Driver for Windows2000 5-5 Device Settings Tab In order to view this window and make settings for optional equipment, select “Properties” in step 4 on page 5-1 and then click on the “Device Settings” Tab. Perform the settings here whenever you add optional equipment. The functions of the optional equipment will only be available to the printer after you have completed the setting here.

  • Page 77: Printer Driver For Macintosh

    6. Printer Driver for Macintosh 6. Printer Driver for Macintosh When using unit as a network printer, it is possible to print PostScript files from a Macintosh Computer. This section contains explanations regarding the procedure to install the Macintosh PPD files and select this printer, as well as explanation about the computer environment required to run the installed files.
  • Page 78 6. Printer Driver for Macintosh Double-Click on the icon for the CD-ROM disk. “A copy machine product name of use” dialog box will appear. Double-Click on “the copy machine product name of use” Installer icon. The window shown on the right will appear. Click on “Continue”. A dialog box will appear.
  • Page 79 6. Printer Driver for Macintosh Access the Apple Menu at the far left of the Menu of Bar and select Chooser. The Chooser will appear. Click once on the LaserWriter 8 icon. Select the name of this printer in the [Select a PostScript Printer] list and then click on the [Create] button.
  • Page 80 6. Printer Driver for Macintosh 6-3 General Dialog Box *The actual layout of each dialog box and the available option and settings may differ somewhat depending upon the application and version of LaserWriter that you are using. Printer: Selects the desktop printer to be used for printing your document. Copies: Type the desired number of prints to be made (or the number of files to be saved to disk) directly into this field.
  • Page 81 6. Printer Driver for Macintosh 6-4 Layout Dialog Box Pages per sheet: Sets the number of pages to be printed on each sheet of paper. Layout Direction: A button of either is clicked, and a layout direction is decided. If right button is selected, the pages are laid out from right to left. Border: Sets the type of line to appear around the page.
  • Page 82 6. Printer Driver for Macintosh 6-5 Printer Specific Options Resolution: Specifies the printing resolution (number of dots per inch) to be used when printing. Select between “600 dpi” and “300 dpi”. The factory default setting is “600 dpi”. Management Code: This setting is used when Copy Management is turned ON in the printer.
  • Page 83 6. Printer Driver for Macintosh Staple: It is possible to staple your copy sets if the optional Finisher is installed. * Stapling is only available with 20 ppm copiers. * The following settings are required before stapling is possible: (1) Change the “Installable Options” setting in step 9 on page 6-3 to the following. Select “Finisher”...
  • Page 84 6. Printer Driver for Macintosh 6-6 Page Setup dialog Dialog Box Settings for paper size, page layout, magnification ratio and print direction (orientation) are performed in the Page Setup dialog box. To display the Page Setup dialog box, select Page Setup… in the File menu of the corresponding application. * The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application and the version of LaserWriter that you are using.
  • Page 85 6. Printer Driver for Macintosh 6-7 PostScript Dialog Box The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application and the version of LaserWriter that you are using. Visual Effects: Visual effects such as horizontal and vertical flip and image inverting can be selected here.
  • Page 86 6. Printer Driver for Macintosh 6-8 Custom paper sizes Dialog Box When a paper sizes is selected in “Custom paper sizes” Dialog Box , the paper size can be set as desired. * The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application and the version of LaserWriter that you are using.

This manual is also suitable for:

Km-2030

Table of Contents