Modifying Or Deleting Encryption Boxes - Kyocera KM-1650 Operation Manual

Other Features of this Fax
10 Enter the 2-digit Encryption Key ID (01 – 20) that
corresponds to the Encryption Key to be used for this
Encryption Box.
11
Press the Enter key.
12 Press the
you want documents received into this Encryption Box
to be automatically printed out.
13 Press the Enter key.
> If you want to continue registering other Encryption Boxes, return to step 4.
> If you are finished registering Encryption Boxes, press the Reset key. The operation panel will

Modifying or Deleting Encryption Boxes

Notes
•
•
•
1
Perform steps 1 – 3 of Registering New Encryption Boxes on page 5-59.
2
Press the
Box you want to modify or delete.
3 Select whether you want to modify information that is registered in that box or to completely delete
the box, and then perform the corresponding procedure below.
> Modifying information in the box
(1) Press the Enter key.
(2) Enter the 4-digit Box ID that corresponds to that
(3) Press the Enter key.
(4) Press the
(5) See Registering New Encryption Boxes on page 5-59, and modify the desired item.
(6) Press the Enter key. The message display will return to the same message as in step (4). If you
(7) Once you are finished modifying information in the Encryption Box, press the
5-60
key or the
return to the initial mode settings.
You CANNOT modify a registered Encryption Box ID.
You CANNOT delete an Encryption Box which still contains received documents.
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key or the
box.
key or the
you want to modify and then press the Enter key.
want to modify other items as well, repeat steps (4) – (6).
End.
key to select whether or not
key to select the Encryption
key to select the item that
Encryption Key ID:00
Enter 2-Digit Key ID
Print on RX.:
On
Off
Program encryption box:
End
#01 5265
#02
Box. ID:
Enter Box ID
Encryption box:#01
End
Box.No.
Box.ID
:5265
:5555
key to select