Konica Minolta bizhub PRESS C6000 User Manual page 96

9.10 Spot Color Table Management
9.10 Spot Color Table Management
This section describes how to manage the spot color stored in the spot color table.
The management of the spot color uses [Spot Color] screen. For detailed information of [Spot Color] screen,
refer to page 9-2.
Rename the Spot Color
1
Select the spot color to rename from the list of [Spot Color]
On the left of [Rename], the name of the selected spot color appears.
2
Click [Rename] on [Spot Color] screen.
[Rename] screen appears.
3
Specify the changed name to [Color Name], and click [OK].
On the left of [Rename], the name specified appears.
% You cannot store the spot color of the same name with other spot color in the spot color table.
% To save the changed name, save the spot color table. For detailed information on how to save the
spot color table, refer to page 9-13.
Copy the Spot Color
You can duplicate the spot color within the same spot color table. When you adjust the spot color, original
settings of the spot color is overwritten. When you want to save the current settings, make the duplication of
it.
1
Select the spot color to duplicate from the list of [Spot Color].
On the left of [Rename], the name of the selected spot color appears.
2
Click [Copy].
[Copy] screen appears.
% When you select the multiple spot colors, [Copy] is not available.
3
Specify the name to [Saved Name] within 31 one-byte alpha-numerical characters.
% You cannot save the spot color of the same name with the spot color in the spot color table.
4
Click [OK].
The duplication of the spot color is generated in the spot color table.
% To save the copied spot color, save the spot color table. For detailed information on how to save
the spot color table, refer to page 9-13.
IC-601
9
9-19