Edit The Color Configuration - Konica Minolta bizhub PRESS C6000 User Manual

13.3

Edit the Color Configuration

13.3 Edit the Color Configuration
This section describes how to edit the Color Configuration.
1
From the Color Configuration list, select the Color Configuration to edit.
% For detailed information on how to connect another controller, refer to page 14-2.
% When you reload the information of the image controller connected currently, select [File] menu -
[Reload]. Executing of reload discards the adjusted Color Configuration when the Color Configura-
tion has not been registered yet in the image controller. Register the settings before executing of
reload, as required. For how to register it, refer to page 13-10.
2
Click [Color Configuration] - [Edit].
The name of the selected Color Configuration is displayed to [Editing Color Configuration Name].
3
When you want to use the Profile Set, check [Use] on the Profile Set list.
% For detailed information on how to create the new Profile Set, refer to page 13-15.
% For detailed information on how to edit the Profile Set, refer to page 13-23page 13-32page 13-39.
4
Click [Default Profile Set Setting / Paper Type Default Setting] - [Setting] and set Default Profile Set Set-
ting / Paper Type Default Setting.
% For how to operate it, refer to page 13-9.
5
Click [Color Conversion Option Settings] - [Setting] and specify the Color Conversion Option Settings.
% For how to operate it, refer to page 13-10.
6
Registers the settings in the image controller.
% For how to operate it, refer to page 13-10.
IC-601
13
13-11