Konica Minolta bizhub PRESS C6000 User Manual page 164

11.9 Edit the RGB-CMYK Device Link Profile
Edit the Existing Point Color
1
From [Adjustment Point], select the adjustment point (input color) to edit.
The input color is displayed on the lower of the Sample Color (below [Result]).
2
From [Effective Range], select the effective range.
The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the
color of [Result] is displayed on the upper-left of the Sample Color and the color of [After adj.] is dis-
played on the upper-right.
% When you select [Narrow], the result of adjustment has influence on the color range which includes
only the near colors to the input color.
% When you select [Wide], the result of adjustment has influence on the color range which includes
the colors which are away from the input color.
% When you select [Normal], it has influence on the middle range between [Narrow] and [Wide].
% You can specify [Effective Range] per adjustment point.
% The values displayed on [Result] and [After adj.] are the value to which Input curve and color con-
version table are applied. (Output curve is not applied to the curve yet.)
3
Enter the value into [Add. Value] to make the value of [After adj.] the target value.
% When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment].
Delete the Existing Point Color
1
From [Adjustment Point], select the adjustment point (input color) to delete.
2
Click [Delete].
The selected adjustment point is deleted.
Adjust the Profile Curve
1
From [Adjustment Curve], select [Input] or [Output].
% When you execute the adjustment of input curve, select [Input].
% When you execute the adjustment of output curve, select [Output].
2
Select the combination of colors from [Combination].
According to the selection from [Combination], [View] check box per each color and [Adjustment] radio
button per each color appear.
% When you select [Input], select [R/G/B] or [RGB].
% When you select [Output], select [C/M/Y/K], [CMY/K] or [CMYK].
% When you select [R/G/B] or [C/M/Y/K], you can adjust the profile curves of each color.
% When you select [RGB] or [CMYK], you can adjust the consolidated profile curves of RGB or CMYK.
% When you select [CMY/K], you can adjust the consolidated profile curve of CMY and the profile
curve of K.
3
When you want to display the profile curve of one color, check [View] of that color.
% When you want to hide the profile curve of one color, remove the check mark from [View] of that
color.
4
When you want to adjust the profile curve of one color, select [Adj.] of that color.
% When check mark of [View] for one color was not selected and you select [Adj.] for the same color,
[View] is checked automatically.
IC-601
11
11-52