Save The Spot Color Table - Konica Minolta bizhub PRESS C6000 User Manual

9.7

Save the Spot Color Table

9.7 Save the Spot Color Table
This section describes how to save the adjusted spot color table.
To save the spot color table, use [Spot Color] screen.
When you save the spot color table to the image controller, the spot color table is registered into the image
controller. When you register the spot color table, the adjusted spot color table can be adopted to the output
according to the priority of the spot color table.
When the spot color table is saved in [Local], [My Documents] or [Network], the spot color table is saved as
the spot color table profile (Extension: ".spo").
1
Click [Save] on [Spot Color] screen.
[Save] screen appears.
2
Specify the name of the spot color table to [Table Name] within 31 one-byte alpha-numerical charac-
ters.
% You can save the spot color table of the same name with those registered in the image controller.
When you add the new spot color, it is added on the same table. When you adjust the existed color,
it is updated. When you delete the existed color, it is deleted from the table.
3
From the tree view of [Destination Folder], select the place to save the spot color table.
The list appears according to the selection.
% When [Controller] is selected on the tree view, "*" mark is added after the name of the spot color
table which was registered at factory shipping. In addition, a red @ mark is added before the name
of the spot color table which was registered at factory shipping.
4
If necessary, enter the description to [Memo].
5
Click [Save].
When you select [Controller] as the destination folder, the spot color table is saved in the image con-
troller.
When you select [Local], [My Documents] or [Network] as the destination folder, the spot color table is
saved as the spot color table profile (Extension: ".spo").
% The priority of the newly saved spot color table becomes the top among the spot color tables of the
same name (group). When you change the priority of the spot color table in the image controller, go
to the step described on page 9-14.
IC-601
9
9-13