Customize The Color Conversions - Konica Minolta bizhub PRESS C6000 User Manual

13.5 Create the Profile Set
% When you click [Browse], go to Step 4.
% When you click [Create], go to the steps described from page 11-16 to page 11-20.
4
On the screen displayed by clicking [CMYK Target Profile] - [Browse], select the CMYK target profile
used and click [Open].
The selected CMYK target profile is displayed to [Selected Profile] of [CMYK Target Profile].
5
Specify the RGB source profile which is used by Profile Set. When you use [sRGB] or [Adobe RGB]
which are preset to the image controller, select [sRGB] or [Adobe RGB]. When you specify the other
RGB source profile, select [Other] and click [Browse].
% When you click [Browse], go to Step 6.
% When you select [sRGB] or [Adobe RGB], go to Step 7.
6
On the screen displayed by clicking [RGB Source Profile] - [Browse], select the RGB source profile used
and click [Open].
The selected RGB source profile is displayed below [Other] of [RGB Source Profile].
7
Click [Next].
The Customize Color Conversions screen appears.
% Go to the step described on page 13-18.
13.5.4

Customize the Color Conversions

On the Customize Color Conversions screen, you can set the rendering intent of CMYK-CMYK conversion,
the preserve mid-tone / preserve solid of CMYK object (CYMK image, CMYK graphic and CMYK text) and
the rendering intent of RGB object (RGB image, RGB graphic and RGB text).
1
From [CMYK-CMYK Conversion] - [Rendering Intent], select the rendering intent.
% [Relative Colorimetric] is the setting to execute color conversion regarding the paper color as com-
pletely white. The paper color parts are represented as colorlessness after color conversion.
% [Absolute Colorimetric] is the setting to execute color conversion maintaining the measurement val-
ue of the paper color. The paper color parts are represented with the color near the actual paper
color after color conversion. When you select [Absolute Colorimetric], [Preserve Mid-Tone] and [Pre-
serve Solid] are not available.
% When you make all contents of the setting on the screen the same content as recommended setting,
click [Undo].
2
For [CMYK Image], [CMYK Graphic] and [CMYK Text], when you set the preserve mid-tone for one
color, check [Preserve Mid-Tone] of that color.
% [Preserve Mid-Tone] is a setting to recompose the color after the color conversion as the same one
color which has composed the color before the color conversion.
IC-601
13
13-18