Outline Of Spot Color; Spot Color] Screen - Konica Minolta bizhub PRESS C6000 User Manual

9.1

Outline of Spot Color

9 Spot Color
9.1 Outline of Spot Color
The spot color is called a special color, meaning the color with a specific name. In general, the name of the
ink provided by the ink manufacturer becomes a name of the spot color.
In the image controller, some spot color tables, "DIC", "CF", and "HKS" are registered at factory shipping.
Within the spot color table, each spot color and the definition values of it are stored. The definition values are
used to output after converting the spot color specified by the application to CMYK.
Use of the Spot Color Adjustment function of Color Centro enables to create the new spot color table, dupli-
cate the registered spot color table, and edit it.
By this function, to replace the spot color which is specified by the application with CMYK values which Color
Centro defines is enabled and the outputting is executed.
9.1.1

[Spot Color] screen

The spot color adjustment function of Color Centro uses [Spot Color] screen.
[Spot Color] screen appears by clicking [Spot Color] button on [Launcher] screen. To close this screen, select
[Close] from [File] menu.
The [Spot Color] screen is composed as follows;
Item
[Table Name]
[Table]
[Color Name]
[Rename]
(spot color list)
[New]
[Delete]
[Copy]
[Manual Adjustment] - [C], [M],
[Y], [K]
IC-601
Description
The name of spot color table loaded using [Table] appears in the left
box of the [Table]. On launching this screen, "Unselected" appears
there.
Displays [Spot Color Table Management] screen to allow you to se-
lect the spot color table to load. You can operate to manage the spot
color table on [Spot Color Table Management] screen.
The name of spot color selected from the list appears in the left box
of the [Rename].
Changes the spot color name currently selected from the list.
Displays the content of the selected spot color table as a list.
Creates the new spot color.
Deletes the spot color selected from the spot color list.
Duplicates the spot color selected from the spot color list with the
changed name.
Allows you to adjust manually the selected spot color using [C], [M],
[Y], and [K].
9
9-2