11.11
Create the CMYK-CMYK Device Link Profile
11.11.2 Set the Profile Name and the Destination
1
Specify the name of CMYK-CMYK device link profile you create to [CMYK-CMYK Device Link Profile
Name] of [Name Settings] screen.
% There is no need to enter the extension because of being added automatically.
% You cannot save the profile of the same name with those registered at factory shipping in the image
controller.
% You can't use "DEVICE" (not only the capital letter but also the small letter) for the profile name when
you save the profile to the image controller.
2
Click [Browse].
[Select Destination Folder] screen appears.
3
Select the destination folder for saving the CMYK-CMYK device link profile you create and click [OK].
The destination folder and file name are displayed on [Destination Folder] and [File Name] of [Name Set-
tings] screen.
4
Click [Next].
The Profile Determination screen appears.
% When there is a profile with the same name, the [Confirmation : Overwrite] screen appears. To save
with another name, click [Cancel]. To overwrite, click [OK].
% Go to the step described on page 11-62.
IC-601
11
11-61