Konica Minolta bizhub PRESS C6000 User Manual page 190

11.12 Edit the CMYK -CMYK Device Link Profile
Adjust the Profile Curve
1
From [Adjustment Curve], select [Input] or [Output].
% When you execute the adjustment of input curve, select [Input].
% When you execute the adjustment of output curve, select [Output].
2
Select the combination of colors from [Combination].
According to the selection from [Combination], [View] check box of each color and [Adj.] radio button
of each color appear.
% When you select [Input] or [Output], in both cases, select [C/M/Y/K], [CMY/K] or [CMYK].
% When you select [C/M/Y/K], you can adjust the profile curves of each color of CMYK.
% When you select [CMYK], you can adjust the consolidated tone profile of CMYK.
% When you select [CMY/K], you can adjust the consolidated profile curve of CMY and the profile
curve of K.
3
When you want to display the profile curve of one color, check [View] of that color.
% When you want to hide the profile curve of one color, remove the check mark from [View] of that
color.
4
When you want to adjust the profile curve of one color, select [Adj.] of that color.
% When check mark of [View] for one color was not selected and you select [Adj.] for the same color,
[View] is checked automatically.
5
To execute the adjustment of the profile curve, you can drag and move the beginning point/ending point
(at both ends of the profile curve) and adjustment points (added by the clicking on the profile curve).
% The selected adjustment point appears as a small red square.
% By clicking [Previous] or [Next], you can switch the point selection to the previous or the next.
% You can move the selected point by entering the coordinate values into the input boxes which are
on the center of vertical/horizontal axises.
% When you want to delete the added point, drag it to the adjacent point or drop it outside of the profile
curve area.
% When you want to reset the adjusted setting, click [Undo] of [Profile Curve Adjustment].
IC-601
11
11-78