Konica Minolta bizhub PRESS C6000 User Manual page 108

10.4 Adjust the Output Color
[Select Spot Color] screen appears.
3
From the tree view, select the place to save the spot color table.
The list appears according to the selection.
4
From the list, select the spot color table to select the spot color.
5
Click [OK].
[Select Spot Color] screen is closed to return to [Select from Spot Color] screen.
A selected spot color table is loaded, and the spot color appears on [Select from Spot Color] screen.
6
From the list, select the spot color to specify as the output color.
The selected spot color is displayed to [Color].
7
Click [OK].
[Select from Spot Color] screen is closed to returns to [Alternative Color Management] screen.
% When you click [Cancel], [Select from Spot Color] screen is closed to return to [Alternative Color
Management] screen.
8
Confirm the preview of [After Adjustment], and repeat from Step 1 to Step 7 as required.
% When you change the priority of the alternative color settings, go to the step described on
page 10-11.
% When you register the adjustment result, go to the step described on page 10-12.
IC-601
10
10-10