Change The Priority Of The Alternative Color - Konica Minolta bizhub PRESS C6000 User Manual

10.5

Change the Priority of the Alternative Color

10.5 Change the Priority of the Alternative Color
This section describes how to change the priority of the alternative color settings in the alternative color table.
The priority defines which alternative color setting is adopted to output when there are multiple alternative
color settings for one input color.
When only one alternative color settings is for one input color, the priority setting isn't necessary.
1
From the list of [ Alternative Color Management] screen, select the alternative color setting to change
the priority.
% Displays the alternative color for the same input color in order of priority.
% When you reload the information of the image controller connected currently, select [File] menu -
[Reload]. Executing of reload discards the adjusted alternative color settings when the adjustment
result has not been registered yet in the image controller. Register the settings before executing of
reload, as required. For how to register it, refer to page 10-12.
2
Click
The position of the selected alternative color moves.
% When you register the adjustment result, go to the step described on page 10-12.
IC-601
or to change the position of the selected alternative color setting.
10
10-11