Confirm Sample Image - Konica Minolta bizhub PRESS C6000 User Manual

8.3

Confirm Sample Image

8.3 Confirm Sample Image
The sample image specified on [Sample Picture] is displayed on [Before Adjustment] and [After Adjustment]
of [Tone Curve Adjustment].
The sample images are enlarged/shrinked automatically to display the whole image in the area of [Before Ad-
justment] and [After Adjustment]. At this time, the proportion of height and width is not changed.
This section describes how to confirm the sample image displayed on [Before Adjustment] and [After Adjust-
ment].
To confirm the image by moving within the preview area
%
Drag the mouse within the area of [Before Adjustment] and [After Adjustment].
The preview moves to the direction of dragging within the area of [Before Adjustment] and [After Ad-
justment].
% Both preview of [Before Adjustment] and [After Adjustment] move at the same time.
To confirm the image by rotating the preview
%
Click [CCW] or [CW].
Both preview of [Before Adjustment] and [After Adjustment] rotate to the specified direction.
% When you click additionally, those rotate to the specified direction according to additional click
times. At this time, the image is not enlarged/shrinked.
% Similar operation can be done when you select [View] menu - [CCW] or [CW].
To confirm the image by enlarging/shrinking the preview
%
Click [Scale Up] or [Scale Down].
Both preview of [Before Adjustment] and [After Adjustment] are enlarged/shrinked.
% In [Scale Up], you can scale up the image size selecting the magnification from among 4 levels which
are 2, 4, 8, and 16 times.
% In [Scale Down], you can scale down the image size until the whole image appears.
% The same operations can be done when you select [View] menu - [Scale Up] or [Scale Down].
To display/hide images of [Before Adjustment] and [After Adjustment]
%
Select [View] menu - [Display only before adjustment], [Display only after adjustment], or [Display Both].
According to the selection, [Before Adjustment] and/or [After Adjustment] appear(s).
After confirming, when you load the tone curve, go to the step described on page 8-9. When you create the
new tone curve, go to the step described on page 8-12.
IC-601
8
8-8