7.4
Print the Chart
7.4
Print the Chart
To execute calibration with the instrument, the chart (a measurement patch chart) corresponding to the se-
lected instrument is necessary.
This section describes how to print the chart.
1
Click [2. Chart Output] - [Output].
[Print Chart] screen appears.
2
Specify [Paper Tray], [Paper Size], and [Copies].
% Specify the number (from [1] to [5]) in [Copies].
3
Select [Paper Type] and [Screen Setting].
% For [Paper Type], you can select [Plain Paper], [Fine], [Color Specific], [Coated GL], [Coated ML],
[Coated GO], or [Coated MO].
% From [Screen Setting], you can select [Dot1], [Dot2], [Line1], [Line2], or [Stochastic].
4
Click [Print].
Chart printing is executed.
% On the chart, Print Date, Output Number of Sets, and No. are printed.
% Go to the step described on page 7-8.
IC-601
7
7-7