Konica Minolta bizhub PRESS C6000 User Manual page 75

8.10 Tone Curve Management
[Export] screen appears.
% When you select the multiple tone curves, [Export] is not available.
% When a folder other than [Controller] is selected on the tree view, [Export] is not available.
% Similar operation can be done when you select [File] menu - [Export].
4
Specify the saving place and file name for the tone curve to export, and click [Save].
Exporting to the specified place as profile is executed.
[Export] screen is closed to return to [Tone Curve Management] screen.
Register the Tone Curve to the Image Controller
You can register the tone curve of [Local], [My Documents] or [Network] in [Controller]. When you register the
tone curve to the image controller, the adjusted tone curve can be adopted to the output.
1
From tree view of [Tone Curve Management], select [Local], [My Documents] or [Network] where the
tone curve profile (Extension: ".xml") is saved.
The list appears according to the selection.
2
From the list, select the tone curve to register.
3
Click [Registration].
[Register] screen appears.
% When you select the multiple tone curves, [Register] is not available.
% When a folder other than [Controller] is selected on the tree view, [Register] is not available.
% Similar operation can be done when you select [File] menu - [Register].
4
Specify [Saved Name] (within 31 one-byte alpha-numerical characters) and [Memo] (within 128 one-
byte alpha-numerical characters).
% You cannot specify the same name with those registered in the image controller.
5
Click [OK].
The tone curve is registered to [Controller].
[Register] screen is closed to return to [Tone Curve Management] screen.
IC-601
8
8-21