Adjustment For Individual Hues; Tone Curve Adjustment; Spot Color; Alternative Color - Konica Minolta bizhub PRESS C6000 User Manual

6.3

Adjustment for individual Hues

6.3 Adjustment for individual Hues
Color Centro can execute not only the color settings for the entire system, but also adjustment for individual
hues.
Color Centro allows you to execute the following adjustments;
- The Tone Curve Adjustment: You can adjust the input/output density curve per each color of CMYK.
- Spot Color: You can adjust the conversion of special color.
- Alternative Color: You can adjust the conversion of alternative color.
6.3.1

Tone Curve Adjustment

The Tone Curve Adjustment is adjustment for output density curve of each color of CMYK.
This function of Color Centro enables to adjust the brightness and the contrast for the entire image.
Operation of adjustment can be done with dragging the slider or the point of curve. You can operate viewing
the preview of the adjustment result.
d
Reference
For detailed information on how to operate the function, refer to page 8-2.
6.3.2

Spot Color

In the image controller, some spot color tables, "DIC", "CF", and "HKS" are registered at factory shipping.
Use of the Spot Color Adjustment function of Color Centro enables to create the new spot color table, dupli-
cate the registered spot color table, and edit it.
By this function, to replace the spot color which is specified by the application with CMYK values which Color
Centro defines is enabled and the outputting is executed.
d
Reference
For detailed information on how to operate the function, refer to page 9-2.
6.3.3

Alternative Color

One alternative color table per color (RGB color/CMYK color) is stored in the image controller. The alternative
color table replaces the specific RGB color/CMYK color within job with CMYK color (alternative color).
Use of the Color Centro enables to set and adjust the alternative color table in the image controller.
Color Centro also enables to select the alternative color from the spot color. By this function, you can adopt
the spot color to the alternative color as the processing of the image controller when the spot color cannot
be specified by the application.
d
Reference
For detailed information on how to operate the function, refer to page 10-2.
IC-601
6
6-4