Konica Minolta bizhub PRESS C6000 User Manual page 251

13.9 Profile Set Management
4
Specify [Profile Set Name] (in case of the image controller) or [File Name] (in case of local/network).
% You cannot save the Profile Set of the same name with those in the image controller.
% When you copy to the image controller, specify the Profile Set Name within 96 one-byte alpha-nu-
merical characters.
5
Click [OK] (in case of the image controller) or [Save] (in case of local/network).
The duplication of the Profile Set is generated.
% When there is the Profile Set with the same name, [Copy Profile Set] screen appears again. In this
case, specify another Profile Set name and click [OK].
6
On [Color Centro Profiler] screen, from the [File] menu, select [Exit].
[Color Configuration Management] screen returns.
13.9.3 Delete
1
Click [Profile Set] - [Edit] on Color Configuration Management screen.
[Color Centro Profiler] screen appears.
2
From the tree view and the list of [Management of the Existing Profile sets], select the Profile Set to de-
lete.
% For detailed information on how to connect another controller, refer to page 14-2.
% When you reload the information of the image controller connected currently, select [View] menu -
[Reload]. Executing of reload discards the adjusted Profile Set when the Profile Set has not been
registered yet in the image controller. Register the settings before executing of reload, as required.
For how to register it, refer to page 13-10.
3
Click [Delete].
The confirmation message appears.
% You can delete the multiple Profile Sets.
% Similar operation can be done when you select [File] menu - [Delete].
4
Click [OK] on the confirmation message.
Profile is deleted.
5
On [Color Centro Profiler] screen, from the [File] menu, select [Exit].
[Color Configuration Management] screen returns.
IC-601
13
13-49