Improve The Accuracy Of The Profile Set - Konica Minolta bizhub PRESS C6000 User Manual

13.7

Improve the Accuracy of the Profile Set

13.7 Improve the Accuracy of the Profile Set
You can improve the accuracy of the Profile Set by using the Measurement Feedback screen.
On the Measurement Feedback screen, by repeating the measurement with the instrument, you can acquire
the best measurement data to apply to the profile.
Although you can execute the measurement feedback when you edit the profile/Profile Set, this section de-
scribes how to execute the measurement feedback for Profile Set by launching Color Centro Profiler.
The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you
can execute the measurement feedback.
The flow of the wizard is as follows;
Confirmation of Procedure
Name and Destination Settings
Measurement Feedback
The following buttons appear on the wizard screen. Use those as required.
- [Next]: Click this button when you go to the next screen after completing the setting of the displayed
current screen.
- [Back]: Click this button when you back to the previous screen.
- [Cancel]: Click this button when you cancel the operation.
- [Suspend the Operation]: This button appears when suspending and restarting of the operation are
available. Click this button when you want to suspend your operation temporarily and restart thereafter.
The setting you made can be saved to the file. For detailed information on how to suspend and restart
your operation, refer to page 14-5.
IC-601
Calculation
Complete
* As required, execute the measurement per object.
* Calculation is executed.
13
13-32