Konica Minolta bizhub PRESS C6000 User Manual page 239

13.7 Improve the Accuracy of the Profile Set
On [Feedback] screen, the new measurement data is added.
The attained level which indicates the improvement of the accuracy is displayed on [Attained Level]
% The attained level is indicated in 3 levels. The maximum level of the attained level is indicated as
"
12
Confirm [Attained Level] and repeat the operation from Step 10 to Step 11 up to the target level.
On [Feedback] screen, the new measurement data is added.
% You can repeat these operations 8 times at the maximum.
% When you reach the maximum level and click [Execute Feedback], the warning screen is displayed.
When you execute the feedback, click [OK]. When you finish the feedback, click [Cancel].
13
Confirm [Attained Level] is reached to the target level, and select the number of the feedback (n times)
which acquires the value to adopt for profile from [Measurement Feedback to Apply].
14
Click [OK].
[Feedback] screen is closed to return to the Measurement Feedback screen.
15
Repeat from Step 1 to Step 14 for other CMYK objects.
The Measurement Feedback screen returns.
16
Click [Confirmation Print] for the test printing.
[Confirmation Print] screen appears.
17
Specify the setting of confirmation printing and click [Print].
% Click [Browse] to display the screen to select the image for printing.
% Click [Select Tray] to display the screen to specify the tray used by confirmation printing.
% From [Screen Setting], select the screen setting used by confirmation printing.
% Specify the port number used by confirmation printing to [Port Number].
% When you click [Cancel], [Confirmation Print] screen is closed to return to the Measurement Feed-
back screen.
18
Confirm the result of test printing and click [Next].
The Complete Profile Set screen appears.
% Go to the step described on page 13-38.
IC-601
".
13
13-37