Basic Operation Of [Tone Curve Adjustment] Screen - Konica Minolta bizhub PRESS C6000 User Manual

8.1 Outline of Tone Curve Adjustment
8.1.3

Basic operation of [Tone Curve Adjustment] screen

This section describes basic operation of [Tone Curve Adjustment] screen.
1
Select the sample image to confirm the conditions where the tone curve is adopted.
% For detailed information on how to select the sample image, refer to page 8-6.
2
Confirm the sample image displayed at [Before Adjustment] and [After Adjustment].
% For detailed information on how to confirm the sample image, refer to page 8-8.
3
Load the tone curve to make adjustment. Or, create the new tone curve.
% For detailed information on how to load the tone curve, refer to page 8-9.
% For detailed information on how to create the tone curve, refer to page 8-12.
4
If necessary, adjust the brightness and the contrast, or set each color adjustment. Or, click on the curve
to add the point and drag the added point to adjust the curve.
% For detailed information on how to adjust the brightness and the contrast, refer to page 8-13.
% For detailed information on how to set each color adjustment, refer to page 8-15.
% For detailed information on how to operate the point, refer to page 8-16.
5
Save the adjusted tone curve.
% For detailed information on how to save, refer to page 8-19.
6
If necessary, execute some management operations for the tone curve.
% For detailed information on how to manage, refer to page 8-20.
7
If necessary, reset the tone curve.
% For detailed information on how to reset, refer to page 8-23.
IC-601
8
8-5