11.7
RGB-CMYK Device Link Profile Management
11.7.3
Change the Information
You can change the information of the saved RGB-CMYK device link profile.
1
Click [RGB-CMYK Device Link Profile] on [Profile Management] screen.
% Similar operation can be done when you select [File] menu - [Profile Type] and select [RGB-CMYK
Device Link Profile] from the displayed sub menu.
2
From the tree view and the list, select the RGB-CMYK device link profile to change the information.
% For detailed information on how to connect another controller, refer to page 14-2.
% When you reload the information of the image controller connected currently, select [File] menu -
[Reload].
3
Click [Change Table Information].
[Change Table Information] screen appears.
% When you select the multiple RGB-CMYK device link profiles, [Copy] is not available.
% Similar operation can be done when you select [File] menu - [Change Table Information].
4
Edit [Saved Name] (within 31 one-byte alpha-numerical characters) and [Memo] (within 128 one-byte
alpha-numerical characters) as required.
% But, you cannot change the table name of the RGB-CMYK device link profile which was registered
at factory shipping.
5
Click [OK].
The RGB-CMYK device link profile information is changed.
IC-601
11
11-36