Unpacking And Inspecting Erx Routers; Before You Begin; Unpacking Erx14Xx Models - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV 26-9-2010 Hardware Manual

E series broadband services routers

Table of Contents

CHAPTER 2

Unpacking and Inspecting ERX Routers

This chapter reviews shipping contents and unpacking procedures for ERX routers. It

contains the following sections:

Before You Begin on page 21

Unpacking ERX14xx Models on page 21

Unpacking ERX7xx Models and ERX310 Broadband Services Routers on page 22

Inspecting Router Components and Accessories on page 23

If You Detect or Suspect Damage on page 23

Contacting Juniper Networks on page 23

The Next Step on page 23

Before you begin unpacking the router, be sure you have the following tools:

A No. 2 Phillips screwdriver

A utility knife

A mechanical lift, or at least two people to assist in lifting

ERX14xx models come boxed, bolted, and strapped to a skid. For your convenience, we

recommend that you unpack the router in the location where you want to install it.

WARNING: Three people are required to install the router in a rack: two to

lift the system into position and one to screw it to the rack.

To unpack ERX14xx models:

Table of Contents

Erx1440 Erx705 Erx310 Erx1410 Erx710 Erx