Appendix B Installation Guidelines And Requirements; Your Preinstallation Responsibilities; Environmental Requirements - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV 26-9-2010 Hardware Manual

APPENDIX B
Installation Guidelines and Requirements

Your Preinstallation Responsibilities

Environmental Requirements

Copyright © 2010, Juniper Networks, Inc.
This chapter reviews preinstallation considerations such as electrical, environmental,
and safety compliances for ERX routers. For complete system specifications, see "System
Specifications" on page 109.
This chapter contains the following sections:
Your Preinstallation Responsibilities on page 117
Environmental Requirements on page 117
Regulatory Compliances on page 118
Safety Guidelines on page 118
Equipment Rack Requirements on page 121
Cabling Recommendations on page 124
Product Reclamation and Recycling Program on page 125
Hardware Compliance on page 126
Complete the following tasks before installing the system:
Verify that the electrical supply meets all AC and DC power requirements. See "System
Specifications" on page 109.
Verify that the site meets all environment specifications. See "Environmental
Requirements" on page 117 and "System Specifications" on page 109.
Verify that the cables you plan to use meet the specifications, and review the cabling
recommendations. See "Cabling Recommendations" on page 124.
Verify the operation of all telephone circuits, digital services, and T1 facilities required
for installation.
Ensure that all IP environment requirements are met, such as IP addresses, subnet
masks, and any specific routing protocol information.
See "System Specifications" on page 109 for complete environmental specifications.
117