Unpacking And Inspecting The Ctp Platform; Before You Unpack The Ctp Platform; Unpacking The Ctp Device - Juniper CTP2000 Series Hardware Documentation

CHAPTER 10
Unpacking and Inspecting the CTP
Platform

Before You Unpack the CTP Platform

Related
Documentation

Unpacking the CTP Device

Copyright © 2017, Juniper Networks, Inc.
Before You Unpack the CTP Platform on page 79
Unpacking the CTP Device on page 79
Inspecting Platform Components and Accessories on page 80
If You Detect or Suspect Damage on page 80
Contacting Juniper Networks on page 81
Before you begin unpacking the device, be sure you have the following tools:
No. 2 Phillips screwdriver
Utility knife
Mechanical lift, or at least two people to assist in lifting
Unpacking the CTP Device on page 79
Inspecting Platform Components and Accessories on page 80
If You Detect or Suspect Damage on page 80
Contacting Juniper Networks on page 81
Depending on the device, it may be delivered boxed, bolted, and strapped to a skid. For
your convenience, we recommend that you unpack the device in the location where you
want to install it.
WARNING: For the larger CTP series devices, three people are required to
install the device in a rack: two to lift the device into position and one to screw
it to the rack.
79