Lc Duplex Connectors; Sc Duplex Connectors - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV 26-9-2010 Hardware Manual

ERX 11.3.x Hardware Guide

LC Duplex Connectors

SC Duplex Connectors

60
Figure 32: I/O Module with RJ-48C Connectors
In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User's Guide (2001), multimode I/O modules with LC connectors are
defined as follows:
CLASS 1 LED PRODUCT.
In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User's Guide (2001), single-mode I/O modules with LC connectors
are defined as follows:
CLASS 1 LASER PRODUCT.
WARNING: Do not look directly into LC-style fiber connectors. The fiber-optic
laser used in single-mode fiber (SMF) meets the regulatory requirements for
casual exposure to the eye; however, looking directly into a laser can cause
eye damage.
WARNING: IEC 825, Class 1 laser fiber connectors are for connection only to
Class 1 laser devices.
In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User's Guide (2001), multimode I/O modules with SC connectors are
defined as follows:
CLASS 1 LED PRODUCT.
In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User's Guide (2001), single-mode I/O modules with SC connectors
are defined as follows:
CLASS 1 LASER PRODUCT.
Copyright © 2010, Juniper Networks, Inc.