Erx7Xx Models Specifications - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV 26-9-2010 Hardware Manual

Table 15: ERX14xx Models Specifications (continued)
Category
Telecommunications
Certification

ERX7xx Models Specifications

Table 16: ERX7xx Models Specifications
Category
Weight
Chassis only
Chassis fully configured
Dimensions
Environmental Requirements
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Heat Dissipation
DC Input
Copyright © 2010, Juniper Networks, Inc.
Specification
ACA TS 016-1997
CTR13 – Commission Decision of 9 July 1997 on a common technical regulation for
attachment requirements for terminal equipment interface for connection to 2048 kbit/s
digital structured ONP leased lines: 97/521/EC – OJ No. L215 Vol. 40, August 1997
CTR24 – Commission Decision of 9 September 1997 on a common technical regulation
for attachment requirements for terminal equipment interface for connection to 34 Mbit/s
digital unstructured and structured leased lines: 97/639/EC – OJ No. L271 Vol. 40, 3
October 1997
FCC PART 68
IECS-003 Issue 3 Class A
PD7024 – Essential requirements for terminal equipment intended for connection to
unstructured digital leased circuits of the public telecommunications network using a
CCITT recommendation G,703 interface at a rate of 2048 kbit/s with a 75 ohm unbalanced
presentation, 1994
RTTE Directive (1999/5/EEC)
Specification
Weights are approximate.
22 lb (9.9 kg)
46 lb (20.7 kg)
10.5 (H) x 19 (W) x 16 (D) inches; 26.67 x 48.26 x 40.64 cm
NEBS GR-63-CORE compliant
Long term: 41° to 104° F (5° to 40° C)
Short term: 23° to 122° F (–5° ˚to 50° ˚C)
Long term: 5% to 85% (noncondensing)
Short term: 5% to 95% (noncondensing)
–40° to 158° F (–40° to +70° C), 95% relative humidity
5% to 95% (noncondensing)
1400 W, 4780 BTU/hour maximum
Appendix A: System Specifications
111