Unpacking And Inspecting E-Series Routers; Before You Begin; Unpacking Erx-14Xx Models - Juniper E Series Hardware Manual

Chapter 2
Unpacking and Inspecting E-series
Routers

Before You Begin

Unpacking ERX-14xx Models

This chapter reviews shipping contents and unpacking procedures for E-series
routers. It contains the following sections:
Before You Begin on page 23
Unpacking ERX-14xx Models on page 23
Unpacking ERX-7xx Models and ERX-310 Routers on page 24
Inspecting E-series Router Components and Accessories on page 25
If You Detect or Suspect Damage on page 25
Contacting Juniper Networks on page 25
The Next Step on page 26
Before you begin unpacking the router, be sure you have the following tools:
A No. 2 Phillips screwdriver
A utility knife
A mechanical lift, or at least two people to assist in lifting
ERX-14xx models come boxed, bolted, and strapped to a skid. For your
convenience, Juniper Networks recommends that you unpack the E-series
router in the location where you want to install it.
Unpacking ERX-14xx Models
23