Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Network Router
  5. E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV...
  6. Manual
Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

E series broadband services routers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E Series™ Broadband
Services Routers
ERX™ Module Guide
Release
11.3.x
Published: 2010-09-27
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Related Manuals for Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010

Summary of Contents for Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010

  • Page 1 E Series™ Broadband Services Routers ERX™ Module Guide Release 11.3.x Published: 2010-09-27 Copyright © 2010, Juniper Networks, Inc.

  • Page 2: Chapter 6, Managing Modules

    ERX 11.3.x Module Guide This guide provides an overview and description of the line modules (LMs), switch route processor (SRP) modules, and I/O modules available for the following Juniper Networks E Series Broadband Services Routers: ERX14xx models, ERX7xx models, and the ERX310 router.
  • Page 3 GE2 1000Base-LH GE-2 GE-2 SFP 5.3.0 I/O or 2XGE APS I/O SFP or GE-2 APS I/O SFP GE2 1000Base-ZX GE-2 GE-2 SFP 5.3.0 I/O or 2XGE APS I/O SFP or GE-2 APS I/O SFP Copyright © 2010, Juniper Networks, Inc.
  • Page 4 OC3/STM1 ATM single-mode long reach OCx/STMx OC3-4 I/O 5.0.0, 5.3.0 without APS/MSP redundancy (256-MB ATM or LONG HAUL memory) OCx/STMx /DS3-ATM OC3/STM1 GE/FE OC3/STM1 GE/FE OC3/STM1 OC3–2 GE 6.1.0 GE/FE APS I/O OC3/STM1 POS Copyright © 2010, Juniper Networks, Inc.
  • Page 5 APS/MSP ATM or redundancy (256-MB memory) OCx/STMx SINGLE /DS3-ATM MODE OC12/STM4 ATM single-mode OCx/STMx OC12 STM4 2.0.0 (128 intermediate reach with APS/MSP ATM or redundancy OCx/STMx SINGLE 5.0.0 (256 /DS3-ATM MODE Copyright © 2010, Juniper Networks, Inc.
  • Page 6 OCx/STMx OC12 STM4 2.0.0 without APS/MSP redundancy LONG HAUL OC12/STM4 POS single-mode long reach OCx/STMx OC12 STM4 2.0.0 with APS/MSP redundancy LONG HAUL OC48/STM16 OC48/STM16 POS single-mode short OC48 OC48 4.1.x reach FRAME APS Copyright © 2010, Juniper Networks, Inc.
  • Page 7 5.1.2, 5.2.0 SRP-40G PLUS (2-GB memory) SRP-40G SRP I/O 4.0.0 PLUS SRP-SE10G (1-GB memory) SRP-SE10G SRP-SE I/O 5.3.0 T3 ATM (4 ports) OCx/STMx 4xDS3 ATM 4.1.0 (128 ATM or 104 MB) OCx/STMx 5.0.0 (256 /DS3-ATM Copyright © 2010, Juniper Networks, Inc.

  • Page 8: Chapter 5, Configuring Ethernet Interfaces

    See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 9 Center wavelength: 1300 nm Rx input power: min: –28 dBm max: –14 dBm Rated for 10 km (6.2 miles) over 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 10 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 11 Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Cables and connectors (copper Maximum range is 100 meters on CAT5 cable. SFP) Copyright © 2010, Juniper Networks, Inc.
  • Page 12 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.
  • Page 13 Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Cables and connectors (copper Maximum range is 100 meters on CAT5 cable. SFP) Copyright © 2010, Juniper Networks, Inc.
  • Page 14 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.
  • Page 15 Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Cables and connectors (copper Maximum range is 100 meters on CAT5 cable. SFP) Copyright © 2010, Juniper Networks, Inc.
  • Page 16 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.

  • Page 17: Multi Mode

    Rated for 275 m (300 yards) over 62.5-micron core cable Rated for 550 m (601 yards) over 50-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Copyright © 2010, Juniper Networks, Inc.
  • Page 18 ERX 11.3.x Module Guide Alarms, errors, and events See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces. Copyright © 2010, Juniper Networks, Inc.

  • Page 19: Single Mode

    Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber Rated for 5 km (3.1 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Copyright © 2010, Juniper Networks, Inc.
  • Page 20 ERX 11.3.x Module Guide Alarms, errors, and events See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 21 Model compatibility ERX1440 router ERX310 router SRP module compatibility SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Cables and connectors (copper Maximum range is 100 meters on CAT5 cable. SFP) Copyright © 2010, Juniper Networks, Inc.
  • Page 22 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.
  • Page 23 Model compatibility ERX1440 router ERX310 router SRP module compatibility SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Cables and connectors (copper Maximum range is 100 meters on CAT5 cable. SFP) Copyright © 2010, Juniper Networks, Inc.
  • Page 24 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.
  • Page 25 See “Ethernet Modules” on page 87 for information about the layer 2 and layer 3 protocols and applications that this module combination supports. Model compatibility ERX1440 router ERX310 router SRP module compatibility SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Copyright © 2010, Juniper Networks, Inc.
  • Page 26 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.
  • Page 27 Model compatibility ERX1440 router ERX310 router SRP module compatibility SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Cables and connectors (copper Maximum range is 100 meters on CAT5 cable. SFP) Copyright © 2010, Juniper Networks, Inc.
  • Page 28 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.
  • Page 29 See “Ethernet Modules” on page 87 for information about the layer 2 and layer 3 protocols and applications that this module combination supports. Model compatibility ERX1440 router ERX310 router SRP module compatibility SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Copyright © 2010, Juniper Networks, Inc.
  • Page 30 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.

  • Page 31: Multi Mode

    3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.
  • Page 32 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 33 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.
  • Page 34 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.

  • Page 35: Single Mode

    Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 36 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 37 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.
  • Page 38 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 39 Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 40 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 41 See “OCx/STMx GE/FE Modules” on page 94 for information about the layer 2 and layer 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support Not applicable Copyright © 2010, Juniper Networks, Inc.
  • Page 42 Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 10 km (6.2 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 43 Table 10: Single-strand SFPs Pairing Maximum Operating Range Fiber Type Nominal Wavelength (nm) (kilometers) 9 microns TX 1310, RX 1550 10 (6.2 miles), matching SFP must have the same operating range Pairs with TX 1550 / RX 1310 Copyright © 2010, Juniper Networks, Inc.
  • Page 44 Pairs with TX 1550 / RX 1310 9 microns TX 1550, RX 1310 40 (24.85 miles), matching SFP must have the same operating range Pairs with TX 1310 / RX 1550 Copyright © 2010, Juniper Networks, Inc.
  • Page 45 Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Copyright © 2010, Juniper Networks, Inc.
  • Page 46 ERX 11.3.x Module Guide Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 47 Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 48 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 49 Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 50 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 51 Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 52 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 53 Rx input power: min: –34 dBm max: –7 dBm Fiber type: 9-micron core Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 54 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 55 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.

  • Page 56: Chapter 3, Configuring Unchannelized Ocx/Stmx Interfaces

    See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 57 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.
  • Page 58 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 59 Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 60 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 61 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.
  • Page 62 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 63 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.
  • Page 64 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 65 3 protocols and applications that this module combination supports. Model compatibility ERX7xx models ERX14xx models ERX310 router SRP module compatibility SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G Module redundancy support 1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router. Copyright © 2010, Juniper Networks, Inc.
  • Page 66 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 67 Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Copyright © 2010, Juniper Networks, Inc.
  • Page 68 ERX 11.3.x Module Guide Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 69 Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Copyright © 2010, Juniper Networks, Inc.
  • Page 70 ERX 11.3.x Module Guide Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 71 Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 72 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 73 Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 74 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 75 Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 76 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 77 Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. Copyright © 2010, Juniper Networks, Inc.
  • Page 78 ERX 11.3.x Module Guide LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 79 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. Copyright © 2010, Juniper Networks, Inc.
  • Page 80 Tunnel-Service and IPSec-Service Interfaces Cables and connectors Not applicable LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Tunnel-Service Interfaces in JunosE Physical Layer Configuration Guide, Chapter 6, Managing Tunnel-Service and IPSec-Service Interfaces. Copyright © 2010, Juniper Networks, Inc.

  • Page 81: Chapter 6, Managing Modules

    See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules. Copyright © 2010, Juniper Networks, Inc.
  • Page 82 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules. Copyright © 2010, Juniper Networks, Inc.
  • Page 83 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules. Copyright © 2010, Juniper Networks, Inc.
  • Page 84 See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information. LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules. Copyright © 2010, Juniper Networks, Inc.
  • Page 85 Electrical Interfaces (1999) for cable lengths up to 201 m (660 feet). LEDs See “Module LEDs” on page 109. Alarms, errors, and events See Monitoring Interfaces in JunosE Physical Layer Configuration Guide, Chapter 2, Configuring T3 and E3 Interfaces. Copyright © 2010, Juniper Networks, Inc.

  • Page 87: Ethernet Modules

    Juniper Networks. If you use a feature before it has been fully qualified, it is your responsibility to ensure that it operates correctly in your targeted configuration.

  • Page 88: Bgp/Mpls Vpns

    F4 OAM and F5 OAM (ATM administration) FDL (facilities data link) Firewall Frame Relay Yes (including fast reconnection of PPPoE subscribers) IEEE 802.3ad link aggregation IEEE 802.3ah OAM link-fault management IP multicast IP reassembly for tunneled packets IPSec IPv6 Copyright © 2010, Juniper Networks, Inc.
  • Page 89 MPLS L2VPNs over the LAGs configured between customer edge (CE) and provider edge (PE) devices Multilink Frame Relay Multilink PPP Network Address Translation (NAT) NBMA (multipoint ATM) OSPF Packet Mirroring Packet over SONET PPPoE Remote loopback Copyright © 2010, Juniper Networks, Inc.
  • Page 90 GE-2 APS I/O or 2XGE APS GE-HDE Line Module with Protocol or Application I/O Modules I/O) GE-8 I/O Modules Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP) tunnels APS/MSP BERT BGP/MPLS VPNs Bridged Ethernet Copyright © 2010, Juniper Networks, Inc.
  • Page 91 Yes (including fast Yes (including fast reconnection of PPPoE reconnection of PPPoE reconnection of PPPoE subscribers) subscribers) subscribers) IEEE 802.3ad link aggregation IEEE 802.3ah OAM link-fault management IP multicast IP reassembly for tunneled packets Copyright © 2010, Juniper Networks, Inc.
  • Page 92 Yes (with fragmentation and reassembly; over MPL2TP on reassembly; over MPL2TP on shared tunnel-server port; shared tunnel-server port; dynamic only) dynamic only) Network Address Translation Yes (not yet fully qualified) (NAT) NBMA (multipoint ATM) Copyright © 2010, Juniper Networks, Inc.
  • Page 93 Yes (GRE tunnels only) Subscriber interfaces (dynamic) S-VLAN subinterface with an untagged C-VLAN ID in Martini circuits Transparent bridging Tunnel-server ports Yes (shared only) Yes (shared only) Unified ISSU VPLS (network interfaces) VPLS (virtual core interfaces) VRRP Copyright © 2010, Juniper Networks, Inc.

  • Page 94: Ocx/Stmx Ge/Fe Modules

    Cisco HDLC DHCP external server DHCP local server DVMRP and GRE support—access side DVMRP and GRE support—server side Dynamic interfaces F4 OAM and F5 OAM (ATM administration) FDL (facilities data link) Firewall Frame Relay Copyright © 2010, Juniper Networks, Inc.
  • Page 95 LAC support—access side LAC support—peer side LNS support—peer side Local loopback MDL (maintenance data link) Mobile IP home agent Yes (not yet fully qualified) MPLS Multilink Frame Relay Multilink PPP Yes (with fragmentation and reassembly) Copyright © 2010, Juniper Networks, Inc.
  • Page 96 Packet over SONET PPPoE Remote loopback Subscriber interfaces (static) Yes (over bridged Ethernet and IPoA) Subscriber interfaces (dynamic) Yes (over bridged Ethernet) Transparent bridging Tunnel-server ports Unified ISSU VPLS (network interfaces) VPLS (virtual core interfaces) VRRP Copyright © 2010, Juniper Networks, Inc.

  • Page 97: Ocx/Stmx Atm Modules

    DHCP external server DHCP local server DVMRP and GRE support—access side DVMRP and GRE support—server side Dynamic interfaces F4 OAM and F5 OAM (ATM administration) FDL (facilities data link) Firewall Frame Relay IEEE 802.3ad link aggregation Copyright © 2010, Juniper Networks, Inc.
  • Page 98 Local loopback MDL (maintenance data link) Mobile IP home agent MPLS Multilink Frame Relay Multilink PPP Yes (with fragmentation and Yes (with fragmentation and reassembly) reassembly) Network Address Translation (NAT) NBMA (multipoint ATM) OSPF Copyright © 2010, Juniper Networks, Inc.

  • Page 99: Ocx/Stmx Pos And Oc48 Modules

    OC48 Line Module Modules with OC3-4 Modules with with OC48 Frame APS Protocol or Application I/O Modules OC12/STM4 I/O Modules I/O Module Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP) tunnels APS/MSP BERT Copyright © 2010, Juniper Networks, Inc.
  • Page 100 DVMRP and GRE support—access side DVMRP and GRE support—server side Dynamic interfaces F4 OAM and F5 OAM (ATM administration) FDL (facilities data link) Firewall Frame Relay IEEE 802.3ad link aggregation IEEE 802.3ah OAM link-fault management IP multicast Copyright © 2010, Juniper Networks, Inc.
  • Page 101 Yes (Layer 2 over MPLS is Yes (Layer 2 over MPLS not supported) is not supported) Multilink Frame Relay Multilink PPP Network Address Translation (NAT) NBMA (multipoint ATM) OSPF Packet Mirroring Packet over SONET Copyright © 2010, Juniper Networks, Inc.

  • Page 102: Service Modules

    VPLS (network interfaces) VPLS (virtual core interfaces) VRRP Service Modules Table 16: Service Modules Protocol or Application Service Line Module (SM) Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP) tunnels APS/MSP BERT Copyright © 2010, Juniper Networks, Inc.
  • Page 103 F4 OAM and F5 OAM (ATM administration) FDL (facilities data link) Firewall Frame Relay IEEE 802.3ad link aggregation IEEE 802.3ah OAM link-fault management IP multicast IP reassembly for tunneled packets IPSec IPv6 IPv6 multicast IPv6 neighbor discovery IS-IS Copyright © 2010, Juniper Networks, Inc.
  • Page 104 OSPF Packet Mirroring Packet over SONET Yes (dynamic only) PPPoE Remote loopback Subscriber interfaces (static) Yes (GRE tunnels only) Subscriber interfaces (dynamic) Yes (over GRE tunnels only) Transparent bridging Tunnel-server ports Yes (dedicated only) Copyright © 2010, Juniper Networks, Inc.

  • Page 105: Unchannelized T3 Modules

    DVMRP (IP-in-IP) tunnels APS/MSP ATM (point-to-point) BERT BGP/MPLS VPNs Bridged Ethernet Bridged IP Cisco HDLC DHCP external server DHCP local server DVMRP and GRE support—access side DVMRP and GRE support—server side Dynamic interfaces Copyright © 2010, Juniper Networks, Inc.
  • Page 106 IP multicast IP reassembly for tunneled packets IPSec IPv6 IPv6 multicast IPv6 neighbor discovery IS-IS J-Flow Statistics L2TP/IPSec LAC support—access side LAC support—peer side LNS support—peer side Local loopback MDL (maintenance data link) Copyright © 2010, Juniper Networks, Inc.
  • Page 107 Packet over SONET PPPoE Remote loopback Subscriber interfaces (static) Yes (over bridged Ethernet and IPoA) Subscriber interfaces (dynamic) Yes (over bridged Ethernet) Transparent bridging Tunnel-server ports Unified ISSU VPLS (network interfaces) VPLS (virtual core interfaces) VRRP Copyright © 2010, Juniper Networks, Inc.
  • Page 108 ERX 11.3.x Module Guide Copyright © 2010, Juniper Networks, Inc.

  • Page 109: Module Leds

    LED Indicator LED Color OFF to ON ON to OFF Module status Green Self-test passed Failure detected modules FAIL Module status Failure detected Diagnostic test running ONLINE Module status Green Module online Module offine Copyright © 2010, Juniper Networks, Inc.
  • Page 110 If the port is configured as DCE, If the port is configured as the LED lights when the DTE DCE, the LED goes out when becomes unavailable. the DTE is available. Copyright © 2010, Juniper Networks, Inc.
  • Page 111 The following figures show a representative module for each of the three variations: SRP module (Figure 1 on page 112) Ethernet line module (Figure 2 on page 113) Other line modules (Figure 3 on page 113) Copyright © 2010, Juniper Networks, Inc.
  • Page 112 SRP module to determine its state; it does not shadow the operations of the primary SRP module. If the standby SRP module detects that the primary SRP module is not active, it reboots the system and takes control. (ERX7xx/14xx models only) Copyright © 2010, Juniper Networks, Inc.

  • Page 113: Redundancy Status

    Figure 3: E3 and T3 Module LEDs Redundancy Status You can determine the redundancy state of line modules by examining the online and redundant status LEDs (ERX7xx/14xx models only). See Table 19 on page 114. Copyright © 2010, Juniper Networks, Inc.

  • Page 114: Online Led

    State of the Line Module Module is booting or is an inactive primary line module. Module is active, but no standby module is available. Module is in standby state. Module is active, and a standby module is available. Copyright © 2010, Juniper Networks, Inc.
  • Page 115 SRP-40G Plus SRP-40G+ ERX-40G2GEC2-SRP SRP-SE10G SRP-SE10G EX3-1GSRP–MOD Line Modules CT3/T3–F0 CT3–12 CT3–12–F0 COCX-F3 UT3f-12 ERX-UT3E3OCX-MOD cOCx/STMx F0 COC3/COC12 COCX/STMX-F0 OCx/STMx ATM OC3/OC12–ATM ERX-O3O12A-MOD OCx/STMx/DS3–ATM OC3/OC12/DS3–ATM ERX–OCXA256M–MOD OCx/STMx POS OC3/OC12–POS ERX-O3O12P-MOD OCx/STMx POS OC3/OC12-POS OC3/OC12-POS Copyright © 2010, Juniper Networks, Inc.
  • Page 116 OC12 STM4 I/O SINGLE MODE OC12–SM I/O OC12–SM-I/O OC3–4 I/O LONG HAUL OC3–4LH I/O OC3–4LH-I/O OC3–4 I/O MULTI MODE OC3–4MM I/O OC3–4MM-I/O OC3–4 I/O SINGLE MODE OC3–4SM I/O OC3–4SM-I/O FE-8 I/O SFP FE-8 SFP FX I/O ERX-8FXSFP-IOA Copyright © 2010, Juniper Networks, Inc.
  • Page 117 Software Display Name Model Number FE-8 I/O FE-8 I/O FE-8–I/O OC3-2 GE APS I/O SFP OC3-2A GE ERX-2OC3GE-IOA GE I/O SFP GE-SFP I/O ERX-GIGESFP-IOA GE-2 SFP I/O GE-2 I/O ERX-2GE-IOA GE-8 I/O GE-8 I/O ERX-8GEHDE-IOA Copyright © 2010, Juniper Networks, Inc.
  • Page 118 ERX 11.3.x Module Guide Copyright © 2010, Juniper Networks, Inc.

  • Page 119: Product Reclamation And Recycling Program

    Product Reclamation and Recycling Program on page 119 Product Reclamation and Recycling Program Juniper Networks is committed to environmentally responsible behavior. As part of this commitment, we continually work to comply with environmental standards such as the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive and Restriction of Hazardous Substances (RoHS) Directive.
  • Page 120 ERX 11.3.x Module Guide equipment that you wish to dispose of and the country where it is currently located, or contact your Juniper Networks account representative. Products returned through our reclamation process are recycled, recovered, or disposed of in a responsible manner. Our packaging is designed to be recycled and should be handled in accordance with your local recycling policies.
  • Page 121 Copyright © 2010, Juniper Networks, Inc.
  • Page 122 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

This manual is also suitable for:

Erx

Table of Contents