Unpacking Erx-7Xx Models And Erx-310 Routers; Inspecting E-Series Router Components And Accessories; If You Detect Or Suspect Damage; Contacting Juniper Networks - Juniper E-Series Installation And User Manual

Unpacking ERX-7xx Models and ERX-310 Routers

Inspecting E-Series Router Components and Accessories

If You Detect or Suspect Damage

Contacting Juniper Networks

ERX-7xx models and ERX-310 routers are shipped boxed, but not
attached to a skid. For your convenience, Juniper Networks recommends
that you unpack the E-series router in the location where you want to
install it.
To unpack an ERX-7xx model or an ERX-310 router:
1
Open the carton from the top.
2
Remove the box of accessories that sits on top of the system.
3
Remove the router from the box.
Heavy-Equipment Warning: Three people are required to install the E-series
router in a rack: two to lift the system into position and one to screw it to the rack.
After you remove the equipment from the shipping containers:
• Confirm the contents of each container.
• Inspect all external surfaces and external connectors for visible signs of
damage.
• Inspect all accessories shipped with each unit.
• Document any damage noted during your inspection.
• Confirm that the router has the correct number and type of modules
for your ordered configuration.
If you detect or suspect damage to any equipment:
• Contact the shipper responsible for delivery, and formally report the
damage.
• Contact your Juniper Networks sales representative or reseller.
Please contact Juniper Networks at 1-888-314-JTAC (within the United
States) or 408-745-9500 (from outside the United States), or contact your
sales representative if you have any questions or concerns. See
Appendix C, Customer
Unpacking ERX-7xx Models and ERX-310 Routers
Support, for complete contact information.
2-3
E-Series Routers