X.21/V.35 Connectors - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV 26-9-2010 Hardware Manual

ERX 11.3.x Hardware Guide

X.21/V.35 Connectors

62
Figure 34: I/O Module with SMB Connectors
Four cables are available for the X.21/V.35 I/O modules:
X.21 DCE cable (terminated with 8 female X.21 connectors)
X.21 DTE cable (terminated with 8 male X.21 connectors)
V.35 DCE cable (terminated with 8 female V.35 connectors)
V.35 DTE cable (terminated with 8 male V.35 connectors)
Each 200-pin proprietary socket on the I/O module provides connections to 8 V.35 or
X.21 ports. The remote end of the cable is terminated with either 8 X.21 connectors or 8
V.35 connectors. The cable you attach to the port on the I/O module determines whether
the connection is X.21 or V.35 and DCE or DTE.
Figure 35: X.21/V.35 Module with 50-Pin X.21/V.35 Connector
Copyright © 2010, Juniper Networks, Inc.