Appendix A Installation Guidelines And Requirements; Your Preinstallation Responsibilities - Juniper E Series Hardware Manual

Appendix A
Installation Guidelines and
Requirements

Your Preinstallation Responsibilities

This chapter reviews preinstallation considerations such as electrical,
environmental, and safety compliances for E-series routers. For complete system
specifications, refer to "System Specifications" on page 113.
This chapter contains the following sections:
Your Preinstallation Responsibilities on page 125
Environmental Requirements on page 126
Regulatory Compliances on page 126
Safety Guidelines on page 126
Equipment Rack Requirements on page 128
Cabling Recommendations on page 131
Hardware Compliance on page 132
Complete the following tasks before installing the system:
Verify that the electrical supply meets all AC and DC power requirements. See
"System Specifications" on page 113.
Verify that the site meets all environment specifications. See "Environmental
Requirements" on page 126 and "System Specifications" on page 113.
Verify that the cables you plan to use meet the specifications, and review the
cabling recommendations. See "Cabling Recommendations" on page 131.
Verify the operation of all telephone circuits, digital services, and T1 facilities
required for installation.
Ensure that all IP environment requirements are met, such as IP addresses,
subnet masks, and any specific routing protocol information.
Your Preinstallation Responsibilities
125