Managing Your Synchronizer System; Configuring Synchronizer Web Admin; Searching Multiple Ldap Contexts For Users And Groups - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

Managing Your Synchronizer
3
System
When you install Novell Data Synchronizer, it is configured with default settings that are
appropriate for your initial Synchronizer system. After installation, you can customize your
Synchronizer system configuration as your Synchronizer system expands over time.
Section 3.1, "Configuring Synchronizer Web Admin," on page 15
Section 3.2, "Configuring the Sync Engine," on page 19
Section 3.3, "Monitoring the Sync Engine," on page 23
Section 3.4, "Working with Synchronizer Log Files," on page 25
Section 3.5, "Changing the Synchronizer Database Password," on page 30

3.1 Configuring Synchronizer Web Admin

Synchronizer Web Admin
Section 3.1.1, "Searching Multiple LDAP Contexts for Users and Groups," on page 15
Section 3.1.2, "Setting Up Multiple Synchronizer Administrator Users," on page 16
Section 3.1.3, "Adjusting the Synchronizer Web Admin Polling Rate for Groups," on page 17
Section 3.1.4, "Adjusting the Synchronizer Web Admin Timeout," on page 18
Section 3.1.5, "Changing the Synchronizer Web Admin Port Number," on page 18
Section 3.1.6, "Configuring Synchronizer Web Admin for a Specific Language," on page 18

3.1.1 Searching Multiple LDAP Contexts for Users and Groups

During installation, you specify one LDAP container to search in for user information and another
container to in search for group information. After installation, you can add more containers for
Synchronizer Web Admin to search in for users and groups when you need to add users and groups
to a connector.
IMPORTANT: Subcontainers are also searched, so you do not need to add them separately.
1 In Synchronizer Web
is the management and administration tool for your Synchronizer system.
Admin, click (Manage Global Settings).

Managing Your Synchronizer System

3
15