Set Storage Array Icmp Response; Set Storage Array Isns Server Ipv4 Address - Dell PowerVault MD3260 Cli Manual

Parameter
Parameter
enclosurePostions
Additional Information
This command defines the position of an enclosure in a storage array by the position of the enclosure ID in the
enclosurePositions list. For example, if you have a RAID enclosure with an ID set to 84 and expansion
enclosures with IDs set to 1, 12, and 50, the enclosurePositions sequence (84 1 12 50) places the RAID
enclosure in the first position, expansion enclosure 1 in the second position, expansion enclosure 12 in the third position,
and expansion enclosure 50 in the fourth position. The enclosurePositions sequence (1 84 50 12) places the
RAID enclosure in the second position, expansion enclosure 1 in the first position, expansion enclosure 50 in the third
position, and expansion enclosure 12 in the fourth position.
NOTE: You must include all of the enclosures in the storage array in the list defined by the
enclosurePositions parameter. If the number of enclosures in the list does not match the total number of
enclosures in the storage array, an error message is shown.

Set Storage Array ICMP Response

This command returns the default values for negotiable settings for sessions and connections, which represent the
starting point for the storage array for negotiations.
Syntax
set storageArray icmpPingResponse=(TRUE | FALSE)
Parameter
Parameter
icmpPingResponse

Set Storage Array iSNS Server IPv4 Address

This command sets the configuration method and address for an IPv4 Internet Storage Name Service (iSNS).
Syntax
set storageArray isnsIPv4ConfigurationMethod=[static | dhcp]
isnsIPv4Address=ipAddress
Parameter
184
Description
A list of all of the enclosure IDs. The sequence of the
enclosure IDs in the list defines the positions for the RAID
enclosure and the expansion enclosures in a storage
array. Valid values are 0 to 99. Enter the enclosure ID
values separated by a space. Enclose the list of enclosure
ID values in parentheses. For storage arrays where the
RAID enclosure has a predefined identifier that is not in
the range of valid enclosure position values, use the
controller value.
Description
This parameter turns on or turns off Echo Request
messages. Set the parameter to TRUE to turn on Echo
Request messages. Set the parameter to FALSE to turn
off Echo Request messages.