Set Storage Array Icmp Response - Dell PowerVault MD3220 Cli Manual

Additional Information
This command defines the position of an enclosure in a storage array by the
position of the enclosure ID in the enclosurePositions list. For example, if you
have a RAI enclosure with an ID set to 84 and expansion enclosures with IDs
set to 1, 12, and 50, the enclosurePositions sequence (84 1 12 50) places the
RAID enclosure in the first position, expansion enclosure 1 in the second
position, expansion enclosure 12 in the third position, and expansion
enclosure 50 in the fourth position. The enclosurePositions sequence (1 84 50
12) places the RAID enclosure in the second position, expansion enclosure 1
in the first position, expansion enclosure 50 in the third position, and
expansion enclosure 12 in the fourth position.
NOTE:
You must include all of the enclosures in the storage array in the list defined
enclosurePositions
by the
not match the total number of enclosures in the storage array, an error message
is shown.

Set Storage Array ICMP Response

This command returns the default values for negotiable settings for sessions
and connections, which represent the starting point for the storage array
for negotiations.
Syntax
set storageArray icmpPingResponse=(TRUE | FALSE)
Parameter
Parameter
icmpPingResponse
212
Script Commands
parameter. If the number of enclosures in the list does
Description
This parameter turns on or turns off Echo Request
messages. Set the parameter to TRUE to turn on Echo
Request messages. Set the parameter to FALSE to turn
off Echo Request messages.