Set Remote Replication - Dell PowerVault MD3260 Cli Manual

Options for the Ethernet Port Parameter
enableIPv6Priority=(TRUE | FALSE) |
IPv4ConfigurationMethod=(static | dhcp) |
IPv6ConfigurationMethod=(static | auto) |
IPv4GatewayIP=(TRUE | FALSE) |
IPv6Priority=[0-7] |
IPv4SubnetMask=(0-255).(0-255).(0-255).(0-255)|
IPv4VlanId=[1-4094] |
IPv6VlanId=[1-4094] |
maxFramePayload=[frameSize] |
tcpListeningPort=[3260, 49152-65536] |
portSpeed=[(autoNegotiate | 1 | 10)]
Additional Information
When you use this command, you can specify one or more of the parameters. You do not need to use all of the
parameters. Setting the availability parameter to serviceMode causes the alternate RAID controller module to
take ownership of all of the virtual disks. The specified RAID controller module no longer has any virtual disks and
refuses to take ownership of any more virtual disks. Service mode is persistent across reset cycles and power cycles
until the availability parameter is set to online.
Use the show controller NVSRAM command to show the NVSRAM information. When the duplexMode option is
set to TRUE, the selected Ethernet port is set to full duplex. The default value is half duplex (the duplexMode
parameter is set to FALSE).
To make sure that the IPv4 settings or the IPv6 settings are applied, you must set these iscsiHostPort options:
•
enableIPV4=TRUE
•
enableIPV6=TRUE
The IPv6 address space is 128 bits. It is represented by eight 16-bit hexadecimal blocks separated by colons. The
maxFramePayload option is shared between IPv4 and IPv6. The payload portion of a standard Ethernet frame is set to
1500, and a jumbo Ethernet frame is set to 9000. When using jumbo frames, all of the devices that are in the network path
should be capable of handling the larger frame size.
The portSpeed option is expressed as megabits per second (Mb/s). The following values are the default values for the
iscsiHostOptions:
• The IPv6HopLimit option is 64.
• The IPv6NdReachableTime option is 30000 milliseconds.
• The IPv6NdRetransmitTime option is 1000 milliseconds.
• The IPv6NdTimeOut option is 30000 milliseconds.
• The tcpListeningPort parameter is 3260.
Values for the portSpeed option of the iscsiHostPort parameter are in megabits per second (Mb/s).

Set Remote Replication

NOTE: This command valid only with Fibre Channel storage arrays.
This command defines the properties for a remote replication pair.
Syntax
set remoteReplication (localVirtualDisk
[virtualDiskName] |
localVirtualDisks [virtualDiskName1 ...
177