Remove Virtual Disk Copy; Remove Virtual Disk Lun Mapping - Dell PowerVault MD3260 Cli Manual

Parameter

Remove Virtual Disk Copy

This command removes a virtual disk copy pair.
Syntax
remove virtualDiskCopy target [targetName]
[source [sourceName]]
copyType=(online | offline)
Parameters
Parameter
target
source
copyType

Remove Virtual Disk LUN Mapping

This command removes the logical unit number (LUN) mapping.
Syntax
remove (allVirtualDisks | virtualDisk
["virtualDiskName"] |
virtualDisks ["virtualDiskName1" ...
"virtualDiskNamen"] | accessVirtualDisk)
lunMapping (host="hostName" | hostGroup=
"hostGroupName")
Parameters
Parameter
allVirtualDisks
virtualDisk or virtualDisks
Description
has special characters, you also must enclose the virtual
disk name in double quotation marks (" ").
Description
Name of the target virtual disk to remove. You must put
brackets ([ ]) around the target virtual disk name. If the
target virtual disk name has special characters, you must
also put quotation marks (" ") around the target virtual disk
name.
Name of the source virtual disk to remove. You must put
brackets ([ ]) around the source virtual disk name. If the
source virtual disk name has special characters, you must
also put quotation marks (" ") around the source virtual
disk name.
Identifies a virtual disk copy with a snapshot. If the virtual
disk copy has an online copy snapshot, set this parameter
to online. If the virtual disk copy does not have a
snapshot, set this parameter to offline.
Description
Removes the LUN mapping from all virtual disks.
Name of the specific virtual disk to remove from the LUN
mapping. You can enter more than one virtual disk name.
You must put quotation marks (" ") and brackets ([ ]) around
the virtual disk name. The virtual disk name and quotation
marks must be inside the brackets.
151