Save Storage Array Configuration - Dell PowerVault MD3260 Cli Manual

Parameters
Parameter
controller
file

Save Storage Array Configuration

This command creates a script file that you can use to create the current storage array virtual disk configuration.
Syntax
save storageArray configuration file="filename"
[(allConfig | globalSettings=(TRUE | FALSE) virtualDiskConfigAndSettings=(TRUE
| FALSE)
hostTopology=(TRUE | FALSE)
lunMappings=(TRUE | FALSE))]
Parameters
Parameter
file
allConfig
globalSettings
virtualDiskConfigAndSettings
hostTopology
lunMappings
Description
RAID controller module with the NVSRAM values to save.
Valid RAID controller module identifier values are 0 and 1.
The identifier value is 0 for the RAID controller module on
the top and 1 for the RAID controller module on the
bottom when viewed from the rear of the enclosure. You
must put brackets ([ ]) around the RAID controller module
identifier.
Name of the file in which to save the values. You must put
quotation marks (" ") around the file name.
Description
Name of the file that contains the configuration values.
You must put quotation marks (" ") around the file name.
Saves all of the configuration values to the file. (If you
choose this parameter, all of the configuration parameters
are set to TRUE.)
Saves the global settings to the file. To save the global
settings, set this parameter to TRUE. To prevent saving
the global settings, set this parameter to FALSE. The
default value is TRUE.
Saves the virtual disk configuration settings and all of the
global settings to the file. To save the virtual disk
configuration and global settings, set this parameter to
TRUE. To prevent saving the virtual disk configuration and
global settings, set this parameter to FALSE. The default
value is TRUE.
Saves the host topology to the file. To save the host
topology, set this parameter to TRUE. To prevent saving
the host topology, set this parameter to FALSE. The
default value is FALSE.
Saves the LUN mapping to the file. To save the LUN
mapping, set this parameter to TRUE. To prevent saving
159