Syntax
show allHostPorts
Parameters
None.
Additional Information
This command returns HBA host port information similar to this example.
HOST PORT IDENTIFIER
12:34:56:54:33:22:22:22
12:34:56:78:98:98:88:88
54:32:12:34:34:55:65:66
Show Physical Disk
For each physical disk in the storage array, this command returns the following information:
•
The total number of physical disks
•
The type of physical disk (SAS)
•
Basic physical disk information:
–
Enclosure location and slot location
–
Status
–
Capacity
–
Data transfer rate
–
Product ID
–
Firmware level
•
Physical disk channel information:
–
Enclosure location and slot location
–
Preferred channel
–
Redundant channel
•
Hot spare coverage
•
Details for each physical disk
Depending on the size of the storage array, this information can be several pages long. The physical disk information is
also returned when you issue the show storageArray profile command.
Syntax
show (allPhysicalDisks
[driveMediaType=(HDD | SSD | unknown | allMedia)] |[physicalDiskType=(SAS)])
| (physicalDisk [enclosureID,slotID] | physicalDisks [enclosureID1,slotID1
enclosureID2,slotID2... enclosureIDn,slotIDn])
summary
Parameters
194
HOST PORT NAME
Jupiter1
Pluto 1
Undefined
HOST TYPE
Solaris
Windows 2000/Server 2003
Clustered
Undefined