Show Virtual Disk Reservations; Start Configuration Database Diagnostic - Dell PowerVault MD3260 Cli Manual

Parameter

Show Virtual Disk Reservations

This command returns information about the virtual disks that have persistent reservations.
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName]
|
virtualDisks [virtualDiskName1... virtualDiskNameN] reservations
Parameters
Parameter
allVirtualDisks
virtualDisk or virtualDisks

Start Configuration Database Diagnostic

This command starts a diagnostic test to validate the configuration database in the controller firmware.
Syntax
start storageArray configDbDiagnostic
Parameters
None.
Notes
Upon completion of the diagnostic test, the controller firmware returns one of these results:
•
Diagnosis completed without errors. No ZIP file created.
•
Diagnosis completed with errors. Refer to the ZIP file created at:
...\Install_dir\data\FirmwareUpgradeReports\timestamp_buildNo.zip
If the diagnostic test detects an inconsistency in the configuration database, the controller firmware performs these
actions:
• Returns a description of the inconsistency.
• Saves a ZIP file containing raw binary data.
The controller firmware saves the ZIP file to this location:
...\Install_dir\data\FirmwareUpgradeReports\timestamp_buildNo.zip
The binary data can be used to help determine the cause of the problem, or the file containing the binary data can be
sent to a Customer and Technical Support representative.
Description
name. The source virtual disk name and quotation marks
must be inside the brackets.
Description
Returns reservation information about all virtual disks in
the storage array.
Name of the specific virtual disk for which you are
retrieving reservation information. You can enter more
than one virtual disk name. You must put brackets ([ ])
around the virtual disk name. If the virtual disk name has
special characters, you must also put quotation marks (" ")
around the virtual disk name.
207