Show Storage Array Unreadable Sectors; Show String; Show Virtual Disk - Dell PowerVault MD3260 Cli Manual

Show Storage Array Unreadable Sectors

This command returns a table of the addresses of all of the sectors in the storage array that cannot be read. The table is
organized with column headings for the following information:
• Virtual disk user label
• Logical unit number (LUN)
• Accessible by (host or host group)
• Date/time
• Virtual disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)
• Physical disk location (enclosure t, slot s)
• Physical disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)
• Failure type
The data is sorted first by the virtual disk user label and second by the logical block address (LBA). Each entry in the
table corresponds to a single sector.
Syntax
show storageArray unreadableSectors
Parameters
None.

Show String

This command shows a string of text from a script file. This command is similar to the echo command in MS-DOS and
UNIX.
Syntax
show "textString"
Parameters
None.
NOTE: You must enclose the string in double quotation marks (" ").

Show Virtual Disk

For the virtual disks in a storage array, this command returns the following information:
• The number of virtual disks
• The name
• The status
• The capacity
• The RAID level
• The disk group where the virtual disk is located
• Details:
– The virtual disk ID
– The subsystem ID
203