None.
Stop Disk Pool Locate
This command turns off the indicator lights on the physical disks that were turned on by the start diskPool
locate command.
Syntax
stop diskPool locate
Stop Enclosure Blink
This command turns off the indicator LED on the enclosure that was turned on by the start enclosure blink
command.
Syntax
stop enclosure blink
Parameters
None.
Stop Physical Disk Blink
This command turns off the indicator light on the physical disk that was turned on by the start physicalDisk
blink command.
Syntax
stop physicalDisk blink
Parameters
None.
Stop Physical Disk Channel Blink
This command turns off the indicator lights on the expansion enclosures that were turned on by the start
physicalDiskChannel blink command.
Syntax
stop physicalDiskChannel blink
Parameters
None.
Stop Physical Disk Channel Fault Isolation Diagnostics
This command stops the physical disk port fault isolation diagnostics, which stops the start physicalDisk
channel fault isolation diagnostics command before it completes.
Syntax
stop physicalDiskChannel faultDiagnostics
Parameters
None.
216