Firmware Compatibility Levels; Commands Listed By Function; Disk Group Commands; Enclosure Commands - Dell PowerVault MD3260 Cli Manual

Powervault modular disk storage arrays
Hide thumbs Also See for PowerVault MD3260:
Table of Contents

Advertisement

When you enter the World Wide Identifier (WWID) of an HBA host port, some usages require quotation marks
around the WWID. In other uses, you must put angle brackets (< >) around the WWID. The description of the
WWID parameter tells you if you must put quotation marks or angle brackets around the WWID.
Script commands must end with a semicolon (;). You can enter more than one script command on the command
line each time you enter a CLI command.

Firmware Compatibility Levels

The RAID controller module firmware for commands is 7.70.

Commands Listed By Function

This section presents the commands organized into groups related to physical, logical, and operational features of the
storage array.

Disk Group Commands

Create Disk Group
Delete Disk Group
Enable Disk Group Security
Resume Snapshot Rollback
Set Disk Group
Troubleshooting
Show Disk Group
Show Disk Group Export Dependencies
Show Disk Group Import Dependencies
Start Disk Group Blink
Start Disk Group Defragment
Start Disk Group Export
Start Disk Group Import
Stop Disk Group Blink

Enclosure Commands

Download Enclosure Management Module Firmware
Save Enclosure Log Data
Set Enclosure Attribute
Set Enclosure Identification
Start Enclosure Blink
Stop Enclosure Blink

Host Topology Commands

Create Host
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents