Connect The Network Cabling And Turn On The Printer; Install The 1000E Into The Printer's I/O Slot - Mita DP-2800 Instruction Handbook Manual
Ecolan 1000e instruction handbook
Hide thumbs
Also See for DP-2800:
- Quick configuration manual (19 pages) ,
- Instruction handbook manual (227 pages) ,
- Service manual (199 pages)
Table of Contents
Advertisement
2.2 Connect the network cabling and turn on the printer.
Connect the proper cable to the interface. Turn the printer on. Follow the appropriate
setup instructions for the your specific operating system later in this guide.
2.2.1 Install the 1000E into the printer's I/O slot.
Follow the illustrations to install the 1000E into the DP-2800.
A. Unscrew the six screws from the back panel to access the main board.
Hardware Installation 2-5
Advertisement
Table of Contents
Troubleshooting
