Chapter 6 Ecolan 1000E And The Macintosh Computer; Using Thedp-2800 Macintosh Installer - Mita DP-2800 Instruction Handbook Manual

EcoLAN 1000E and the Macintosh Computer
The network printer information presented in this chapter applies to the Macintosh
Operating System. The DP-2800 Macintosh solution is supported by an installer on
the CD packaged with the DP-2800 printer.
Important: For Macintosh compatibility, the PostScript option, KPDL-II must be
A utility called KyoManage which allows setting the printer's IP Address from a
Macintosh is available from Mita's web site (www.Mita.com). Instructions for
KyoManage are included at the end of this chapter. Once the printer's IP Address is
set, the 1000E may be managed with a standard browser by connecting to the printers
IP address (http://xxx.xxx.xxx.xxx).
6.1 Using the DP-2800 Macintosh Installer
The DP-2800 Macintosh installer can be found on the Mita CD which accompanies
the printer. Because the DP-2800 Driver and the DP-2800 Utility create their own
preference files on the Macintosh, the DP-2800 installer must be used on each
Macintosh system on the network.
To use the installer, open the drivers folder on the CD and select the DP-2800 installer.
The DP-2800 installer places the DP-2800 Driver, the DP-2800 Utility, the TrueType
Screen Fonts, PPDs, and the readme file onto your Macintosh. After installing the DP-
2800 files, the DP-2800 installer closes and restarts the Macintosh system.
installed, and the default emulation for the Option interface must be set to
KPDL or KPDL (Auto).
EcoLAN 1000E and the Macintosh Computer 6-1
6