Ecolan 1000E Configuration - Mita DP-2800 Instruction Handbook Manual

4.4 EcoLAN 1000E Configuration

The MAP utility or an IP Web Browser must used to define the context and tree of the
Print Server. It is also used to change the Print Server name, set in a password, modify
scan and frame search parameters, and sent in bindery-mode specific values.
Use the MAP utility or IP Web Browser (refer to Chapter 3) to access the Setup pages
of the EcoLAN 1000E. Once you have accessed the Network Administration pages or
the Main Menu, do the following:
1. Select Setup NetWare under Protocols.
2. Click on Enable NetWare. If it is not selected, the NetWare protocols will not
come up, the EcoLAN 1000E will not appear as an advertised device, and the NIC
will not be accessible using IPX SNMP.
3. The default name for the NetWare Print Server is KYO_123456, where 123456 is
the serial number of the EcoLAN 1000E. This is also the name of the printer in
peer-to-peer mode. If you want to change the default Print Server name , type this
name in the Print Server Name space. This name must match the Print Server
name previously defined in the PCONSOLE or NWADMIN setup. Leave the
space blank if the default name is to be used.
4. If you want the EcoLAN 1000E login with a password, this password may be
entered in the Print Server Password field, and again in the Password Retype
field. If a password is used, this password must be the same password for all
bindery-based and NDS-based Print Server entries.
5. Enter the name of a preferred bindery-based file server in the Preferred File
Server field. The Preferred File Server entry is significant only for bindery or
bindery emulation based operations. Refer to 4.1.9 Preferred File Servers for the
significance of a Preferred File Server. The Print Server must be configures on the
preferred file server. Incorrect setup of a Preferred File Server can interfere with
NetWare printing.
6. If the Print Server is to be operated under Novell Directory Services, type in a
Context entry and Preferred NDS Tree entry in the appropriate fields. Be sure to
give the whole context, whether typed or typeless, and do not begin your context
path with a trailing period (.). If you don't know your tree, type: whoami at the
DOS command line. A typed context name example is:
ou=standard.ou=organization_1
NetWare Configuration 4-21