Mita DP-2800 Instruction Handbook Manual page 143

In this context, active indicate that there is a file
in the queue. "
::= { queueEntry 6 }
qpriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NetWare priority assigned to the queue."
::= { queueEntry 7 }
-- The DPI TCP/IP Group
enabletcp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies whether or not the TCP/IP protocol
is enabled. Changes occur at the next reset or power cycle. Writable Values are:
enable
disable
or any truncation of these terms, in upper case or lower case. Stored
values are:
ENABLED
DISABLED
"
::= { dpitcp 1 }
ipaddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the unit's internet address."
::= { dpitcp 2 }
-- Default value reported on
subnet OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the unit's subnet mask."
::= { dpitcp 3 }
-- Default value reported on
defaultgateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
NIC is no value, indicating that there is no value in NVRAM
NIC is no value, indicating that there is no value in NVRAM
NIC MIB Definition Appendix C-17