Exit Telnet - Mita DP-2800 Instruction Handbook Manual

Note: There is a single maintenance access password to the EcoLAN 1000E. This pass-
word is used for both Telnet and HTML maintenance programs. This password
may be changed from Telnet or from HTML (accessed either via MAP or Web
Browser utility.

7.5.7 Exit Telnet

Use the following procedures to exit Telnet:
1. To end your Telnet session, type E at the main menu. If you have made any
changes, the following menu will appear:
2. Choose your option and press ENTER. For example, type 2 and press ENTER.
The program will save your changes and reset the print server so that the changes
will take effect.
TCP/IP Configuration 7-44
The Configuration Utility
Unit Serial no. 221963
Exit
1. Save Changes and Exit
2. Save Changes and Reset
3. Exit Without Saving Changes