Connect The Printer To The Computer - Mita DP-2800 Instruction Handbook Manual

9.

Connect the printer to the computer.

CAUTION
Before performing this step, be sure to turn off the printer's power switch and
unplug the power plug from the power outlet. Failure to do so may result in
electric shock.
A standard Centronics parallel interface connector (
connector (IOIOI) are located on the rear side of the printer. For pin connections, please refer to
Appendix C.
Chapter 1 Safetyguards and Installing the Page Printer
) and RS-232C/RS-422A serial interface
Parallel Interface Connector (
Serial Interface (RS-232C/RS-422A) Connector
(IOIOI)
Slot Cover for Installation of Optional
Interface
)
1- 25